That’s the way an industrial panel should look. I would reject any panel that came in with wire ties bundling cable rather than duct. If anything I might have added another horizontal run above the PULS UPS.
Control panels always end up with changes in the field. With wire ties the first change means the wire ties get cut and the panel turns into a rats nest. It’s bad enough that the first electrician that opens that panel is going to throw all those pretty covers on the bottom of the panel and leave them there. Mark > On Mar 18, 2018, at 5:01 PM, Jaime Solorza <[email protected]> wrote: > > Believe me.. makes Troubleshooting a breeze and looks professional so they > don't balk when I charge 75 to 150 an hour... > > Jaime Solorza > > On Fri, Mar 16, 2018, 4:35 PM Adam Moffett <[email protected] > <mailto:[email protected]>> wrote: > They are pretty, but I couldn't consume that much space with wire duct. > Space = money. > > > ------ Original Message ------ > From: "Darin Steffl" <[email protected] > <mailto:[email protected]>> > To: [email protected] <mailto:[email protected]> > Sent: 3/15/2018 10:54:42 AM > Subject: Re: [AFMUG] Fwd: 8 hours no lunch > >> Beautiful work of art! >> >> On Mar 14, 2018 8:38 AM, "Jaime Solorza" <[email protected] >> <mailto:[email protected]>> wrote: >> test >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 <tel:(915)%20861-1390> >> ---------- Forwarded message ---------- >> From: Jaime Solorza <[email protected] >> <mailto:[email protected]>> >> Date: Mon, Mar 12, 2018 at 5:23 PM >> Subject: 8 hours no lunch >> To: Animal Farm <[email protected] <mailto:[email protected]>> >> >> >> Tested and certified....yay us >> >> Jaime Solorza >>
