We found that all of the "automatic power adjustment" stuff had to be
turned off completely before we could get accurate signal levels. Once
we did that, they aligned like almost any other 11GHz equipment.
We have two links using the AF11x, both about 10 miles (MOL), one in a
very quiet environment, and it is at full modulation most of the time.
The other has one end in a relatively noisy environment, and it gets to
full modulation some times, but not quite.
bp
<part15sbs{at}gmail{dot}com>
On 4/22/2018 9:29 AM, Jaime Solorza wrote:
Hello Kool Kats... Kopacetic...yeah..
We installed 4 PTP 11GHz AirFibers last week but winds kept us from
aligning. One link came up with just installers leaving dishes in
general direction at 4 miles.
I have not read the manual on these...I did notice an alignment tool
in menu. How does it work? It the optimal alignment having both ends
at same or really close dB levels? the LEDs all came up on link that
linked up but one side was -39 and other -91dBm...so I am not sure
that it good way....ideas? Thanks
Jaime Solorza
