If you can't find them let me know. I can make them.
Not saying in which century I will get around to it...
-----Original Message-----
From: George Skorup
Sent: Tuesday, April 24, 2018 2:47 PM
To: [email protected]
Subject: Re: [AFMUG] Looking for waveguide parts
Looks like we'll be able to get a pair of original Western Electric's.
They're WR-159 flanges, so we'll either need a 159 to 137 transition, or
159 and 137 to type N adapters and coax in between. I'd prefer to find
some transitions and avoid the coax.
On 4/24/2018 3:18 PM, [email protected] wrote:
You need a circular waveguide to N connector transition (assuming you
want to feed with coax). The waveguide need to taper to the bottom of
the horn.
-----Original Message----- From: George Skorup
Sent: Tuesday, April 24, 2018 12:54 PM
To: [email protected] ; [email protected]
Subject: [AFMUG] Looking for waveguide parts
Anybody got or can get their hands on some 6GHz combiners? Looking to do
a dual-pol ~20 mile path with existing KS15676 horns at both ends. Looks
like one side is completely stripped and the other side is still set up
for 4GHz.
