So why is type 2 the default on most routers? For what reason would you use an E2 over an E1?
> On May 13, 2018, at 17:40, Matt Hoppes <[email protected]> > wrote: > > Ooooo. They are all going out as Metric-type 2 > >> On May 13, 2018, at 17:37, Matt Hoppes <[email protected]> >> wrote: >> >> Correct. A is distributing default route. Directly to C (in theory but not >> happening) and to B which is distributing to C currently. >> >> This is edgeOS. >> >> I’m actually not sure. I’ll have to check on E1 vs E2. >> >>> On May 13, 2018, at 17:26, George Skorup <[email protected]> wrote: >>> >>> OK, so only A is distributing the default route. as-type-1 or as-type-2? E1 >>> takes path costs into account. E2 does not. >>> >>> Bounce a neighbor and see if it fixes itself. I assume RouterOS. I've seen >>> weird stuff like this happen before. >>> >>>> On 5/13/2018 4:15 PM, Matt Hoppes wrote: >>>> Only one - the Long one. >>>> >>>> The things connected to A take the direct path but the default is not >>>> coming through for some reason. >>>> >>>> On May 13, 2018, at 17:12, George Skorup <[email protected]> wrote: >>>> >>>>> How many default routes show up in the LSA table? >>>>> >>>>>> On 5/13/2018 3:51 PM, Matt Hoppes wrote: >>>>>> OSPF question: >>>>>> >>>>>> A—-B—-C >>>>>> And >>>>>> A——C >>>>>> >>>>>> A is the Internet peering router. >>>>>> >>>>>> C should end up with two default routes in it correct? >>>>>> >>>>>> One through B and one directly to C? >>>>>> >>>>>> What’s odd is everything on A populated on Cs route table as direct >>>>>> routes - except for the default route. >>>>> >>>
