No. Both chains. SISO would be about half that, but still full duplex.
bp
<part15sbs{at}gmail{dot}com>
On 5/17/2018 8:03 AM, Adam Moffett wrote:
750Mbps on a single chain?
------ Original Message ------
From: "Bill Prince" <part15...@gmail.com <mailto:part15...@gmail.com>>
To: af@afmug.com <mailto:af@afmug.com>
Sent: 5/17/2018 11:00:47 AM
Subject: Re: [AFMUG] AF11x
I don't know about that. A single AF11X can do close to 750 Mbps full
dux. Two of them with different frequencies would be in the
neighborhood of 1.5 Gbps. Not too shabby for around $4500 of hardware.
bp
<part15sbs{at}gmail{dot}com>
On 5/17/2018 7:47 AM, Mathew Howard wrote:
Buying 2 AF11x should be a lot cheaper... it should still be under
$4k for the hardware.
They wouldn't get as much throughput as a more expensive 2+0 system
though...
On Thu, May 17, 2018 at 9:36 AM, Adam Moffett <dmmoff...@gmail.com
<mailto:dmmoff...@gmail.com>> wrote:
So is it less expensive to buy 2 AF11x or to buy one more
expensive 2+0 system?
------ Original Message ------
From: "Mathew Howard" <mhoward...@gmail.com
<mailto:mhoward...@gmail.com>>
To: "af" <af@afmug.com <mailto:af@afmug.com>>
Sent: 5/16/2018 10:07:43 PM
Subject: Re: [AFMUG] AF11x
Well, you could use two radios in SISO mode on each end... but
then you'd have to deal with having separate ethernet ports and
mounting the second radio (not to mention some extra cost).
On Wed, May 16, 2018 at 3:36 PM, <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
Any way to make the V&H run in different frequencies?