do you like liability and property damage? cause thats how you get liability and property damage
fees range from 5-25 for rustic no power/water/etc to 150/night depending on the park. but 30-50 is average with power and water On Thu, May 31, 2018 at 10:40 AM, <[email protected]> wrote: > What does a traveler expect to pay to park in one of these places? I have > about 10 acres next to I-80 with water, power and sewer already installed. > I could lay down some gravel and put up a sign. > > *From:* Steve Jones > *Sent:* Thursday, May 31, 2018 9:39 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] RV park network design > > industrial vending machine selling routers. > Im trying to get the one we are doing to finger conduit to each site post > for future use, whether fiber or copper > > On Thu, May 31, 2018 at 10:22 AM, Cameron Crum <[email protected]> wrote: > >> You'd be surprised. A lot of them travel with their own cable modems and >> wifi routers. But you could always rent them one, or set up each ONT with a >> small wifi router already and give them a choice. >> >> On Thu, May 31, 2018 at 10:05 AM, Jason McKemie < >> [email protected]> wrote: >> >>> Probably zero. >>> >>> >>> On Thursday, May 31, 2018, <[email protected]> wrote: >>> >>>> How many RV travelers are set up for ethernet vs WiFi? >>>> >>>> *From:* Jason McKemie >>>> *Sent:* Thursday, May 31, 2018 6:42 AM >>>> *To:* [email protected] >>>> *Subject:* Re: [AFMUG] RV park network design >>>> >>>> I'd do fiber as well, seems like that many long-run cat5/6 connections >>>> could be problematic. >>>> >>>> On Wednesday, May 30, 2018, Cameron Crum <[email protected]> wrote: >>>> >>>>> Why run ethernet? This seems ideal for fiber. Put a small box for the >>>>> ONT on the same pole as the electrical hookup with about 20 ft of ethernet >>>>> cable so they can drag it through a window and call it a day. Rent them a >>>>> cheap router if they want wifi or mount a small loco ac or something >>>>> running as a low powered AP and alternate frequencies every 3 or 4 spaces. >>>>> >>>>> >>>>> >>>>> >>>>> On Wed, May 30, 2018 at 2:57 PM, Colin Stanners <[email protected]> >>>>> wrote: >>>>> >>>>>> Be careful of selling service over Wi-FI... customers buy "signal >>>>>> boosters" that run their own DHCP server, or they see a very strong >>>>>> signal >>>>>> to their booster and complain that their service sucks (don't understand >>>>>> that the signal from the booster to your network is low). And there's >>>>>> interference from mobile hotspots etc.... >>>>>> >>>>>> I would do like Adam says, run ethernet lines everywhere with >>>>>> outdoor-grade ethernet connection boxes (make sure to have a surge >>>>>> protector on each line as it returns to your switch). You can try >>>>>> offering >>>>>> some service over wifi but tell customers that if they want reliable >>>>>> speeds >>>>>> they need to hardwire. >>>>>> >>>>>> On Wed, May 30, 2018 at 1:07 PM, castarritt <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> We were approached by a current subscriber who is building an RV >>>>>>> park with around ~100 pads, and he wants us to offer service to his >>>>>>> tenants. This isn't the typical situation where we would sell service >>>>>>> to >>>>>>> the RV park, and they handle distributing it to their customers. He >>>>>>> wants >>>>>>> to avoid providing wi-fi himself, and will instead let us charge every >>>>>>> client that wants service separately. Also, this isn't a campground; >>>>>>> his >>>>>>> shortest lease term will be monthly. >>>>>>> >>>>>>> While the park is under construction, he is willing to let us lay >>>>>>> conduit, so we could provide wired service to each pad if we wanted to. >>>>>>> Alternatively, we could just setup a bunch of wi-fi APs. One potential >>>>>>> complication is that we have a fairly busy cluster of 5g PMP450s a >>>>>>> couple >>>>>>> hundred yards from this RV park, so while wired service could be more >>>>>>> reliable for the park tenants, the potential for 100 customer wi-fi >>>>>>> routers >>>>>>> we can't control operating within sight of our PMP450 POP sounds like >>>>>>> the >>>>>>> stuff of nightmares. >>>>>>> >>>>>>> We are leaning more towards a wi-fi option due to better control >>>>>>> over spectrum, as well as avoiding maintenance of 100 outdoor ethernet >>>>>>> ports that the customers would be plugging into, but we are open to >>>>>>> suggestions. >>>>>>> >>>>>>> Also, assuming wi-fi is the correct answer, does anyone have any >>>>>>> equipment recommendations? The park is about 400' by 900'. I was >>>>>>> looking >>>>>>> at either doing a whole bunch of low end APs, or maybe ~8 sectors. We >>>>>>> haven't used any of the Cambium wi-fi gear yet, but the cnPilot E501S >>>>>>> looks >>>>>>> interesting. >>>>>>> >>>>>>> >>>>>>> Thank you, >>>>>>> >>>>>>> Chris Starritt >>>>>>> Western Broadband >>>>>>> [email protected] >>>>>>> 512-257-1077 >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >> > >
