As an addition I run trac with 'mod_python' (slow performance ). If I run trac with 'tracd', performance is much better , I still get warnings, but the environment is not reloading .
On Aug 18, 3:13 pm, Sergey <[email protected]> wrote: > Hi ! > > I ve got following debug messages when using tracd 0.11.4 and agilo > 1.0.1_PRO-py2.5 : > > Trac[perm] WARNING: perm.permissions() is deprecated and is only > present for HDF compatibility > Trac[env] INFO: Reloading environment due to configuration change > Trac[env] WARNING: base_url option not set in configuration, generated > links may be incorrect > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'fields' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'changes' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'available_types' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'row_groups' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'allowed_links' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'source' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'ticket_types' > Trac[log] WARNING: [CommandParser] [By Key]: Warning 'target' > Trac[env] INFO: Reloading environment due to configuration change > > Trac[env] WARNING: base_url option not set in configuration, generated > links may be incorrect > > Agilo is the only one plugin I use. > > Regards, > Sergey > > On Aug 12, 3:40 am, Ken <[email protected]> wrote: > > > In regards to the additional plugin question, I do have two other > > plugins installed globally (the egg file is in site-packages): > > > TicketImport 0.7c > > TracNav 4.2 > > > Given this, what I will try to do over the next couple days as I can > > squeeze it in, I will set up a new Trac site (11.5) and ensure the > > other plugins are disabled and test a few page loads to see if I can > > reproduce the multiple reloads/resetting of the environment. If that > > fails to produce any results, I will then turn on Agilo and test again > > to see if that causes it. > > > I will update you on the findings and hope this will narrow down the > > issue. > > > Thanks for the update on the Trac dev site regarding the touch > > function. In my googling, I did see a discussion a few years back on > > the use of this and the danger it would cause if abused...... > > > Thanks again for your time, > > Ken > > > On Aug 11, 1:01 pm, Andrea Tomasini <[email protected]> > > wrote: > > > > On 11 Aug, 2009, at 13:52 , Ken wrote: > > > > > Andrea, > > > > Hi Ken :-) > > > > > I spent a little time last night reviewing the details of the debug > > > > logging and noticed this line coming up in the file. Also, while > > > > editing the trac.ini file, I was routinely prompted when saving that > > > > it had been changed. It appears there is something in my environment > > > > that is touching the trac.ini file and doing a reset of the > > > > environment at each page reload. > > > > That is not good, do you have other plugins other than Agilo installed? > > > > > Let me know if you think this may be an Agilo issue or something I > > > > should look into with the Trac group. I can forward to you the log > > > > this came out of as well from the one page refresh test. > > > > I would guess that something is wrong, there has recently been a > > > discussion on the Trac development list about this issue and about the > > > fact that the .touch() can be highly abused... we will also try to > > > improve our behavior in reloading ;-) > > > > > Thanks. > > > > YAW > > > > Best > > > ANdreaT --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Agilo for Scrum" group. This group is moderated by agile42 GmbH http://www.agile42.com and is focused in supporting Agilo for Scrum users. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/agilo?hl=en -~----------~----~----~----~------~----~------~--~---
