Bill, Yes, the turn signals ion a 164 self-cancel using a similar process like the one used on the Milano using two prongs on bottom of horn contact plate attached to steering wheel. However, comma Comma COMMA be aware THAT THE 164 HAS AIR BAG clock spring/horn contact/signal canceling device all in one component. This clock spring has to be removed very carefully to prevent damage to air bag internal wiring. New one was just recently listed for $399 on ebay (did not sell) wonder why? I just recently had to change bad one on my 164 as wiring was bad and had open circuit inside unit so air bag would never have worked in a crash. See how to remove air bag, steering wheel and clock spring to get to headlight switch here: _http://www.alfabb.com/bb/forums/164-168-1991-1995/159671-alfa-164-black-bea uty-1991-93-air-bag-project.html_ (http://www.alfabb.com/bb/forums/164-168-1991-1995/159671-alfa-164-black-beauty-1991-93-air-bag-project.html) Ciao, Alfisto Steve In a message dated 12/17/2009 2:32:32 A.M. Eastern Standard Time, [email protected] writes:
Date: Mon, 14 Dec 2009 08:16:43 -0500 From: "bill h" <[email protected]> Subject: [alfa] 164 turn signal switch i have a 1991 164 and the turn signals won't self cancel. does the cancel mechanism work similar to a milano? what is the likely cause ? this is issue as it is a requirement for pennsylvania state safety inspection. the shop i have been using for over 20 years has looked the other way for years but the are telling me the state is really cracking down and are wary of giving me a "pass". thanks for any help bill 1991 164 88 milano verde 73 spider and gtv -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
