Good going, Skip. Now give us the cause. Were the head studs coated
with white powder? That normally happens when running well water in the
cooling system. Since I have a well, I always use distilled water.
I once had to take a die grinder with a little wire brush to clean the
inside of the water jacket of accumulated white stuff.
If not deposits from mineral water, what was the cause? Galvanic action
between the aluminum and the steel? Or what?
Ciao,
Russ Neely
--- On Wed, 1/6/10, skip <[email protected]> wrote:
From: skip <[email protected]>
Subject: [alfa] (Alfa) 2.0 Liter Head Removal
To: "Alfa Digest" <[email protected]>
Date: Wednesday, January 6, 2010, 8:24 PM
Now for an update on the 2.0l Alfa head removal. IT'S OFF finally.
That rascal was stuck on there!! And fought all the way to the top of the
studs.
<snip>
Skip Patnode
[email protected]
'67 Duetto
Norfolk, Va
--
to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi
or email "unsubscribe alfa" to [email protected]
