generally its the ovality which is the problem and thats measured with an inside dial gauge. the only reason you'd have to measure the diameter would be to see if you have an oversize.rear enough on alfas.
--- On Tue, 2/23/10, Watry, Andrew (LNG-SFR) <[email protected]> wrote: From: Watry, Andrew (LNG-SFR) <[email protected]> Subject: [alfa] tool to measure engine bore? To: [email protected], [email protected], [email protected] Date: Tuesday, February 23, 2010, 3:31 PM What kind of measuring device do folks use for measuring the bore of liners? There are inside barrel mics, sprung "T" mics that you spring out and lock, then measure with an outside mic, bore dial indicators, all kinds of stuff. Not sure what's best. Thanks for any advice. Andrew -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected] -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
