Palo Alto Speedometer (www.paspeedo.com). Very pleasant and competent. Fast turn-around and I hadn't asked for quick service. Speedo is still working fine six years after rebuild. Dick Bevins
On May 7, 2012, at 7:41 PM, alfa-digest wrote: > > alfa-digest Monday, May 7 2012 Volume 10 : Number 2564 > > > > Forum for Discussion of Alfa Romeos, etc. > Richard Welty <[email protected]> > Digest Coordinator > > Contents: > > [alfa] Speedometer and Trim Piece > [alfa] Two sets Spica hard pipe clamps FS > > Alfa Digest Home Page: > > http://www.digest.net/alfa/ > > Send submissions to [email protected] > > Send administrative requests to [email protected] > > To unsubscribe, include the word unsubscribe by itself in the body of > the message, unless you are sending the request from a different address > than the one that appears on the list. Include the word help in a > message to alfa-digest-request to get a list of other majordomo > commands. > > ---------------------------------------------------------------------- > > Date: Sun, 6 May 2012 13:24:44 -0500 (GMT-05:00) > From: Robert Block <[email protected]> > Subject: [alfa] Speedometer and Trim Piece > > Looking for best recommendation for rebuilding a speedometer. Located in > Chicago. > > Also need help in locating the plastic trim piece that fits above door > panel on driver side. > > Robert Block > 1987 Quad > [email protected] > > ------------------------------ > > Date: Mon, 7 May 2012 19:32:25 +0000 > From: "Watry, Andrew (LNG-SFR)" <[email protected]> > Subject: [alfa] Two sets Spica hard pipe clamps FS > > I have two full sets of the various aluminum clamps for the hard lines from > the Spica pump to the injectors, good for all years. Good used, one clamp on > one set has a slight crack at the bolt hole (who would tighten a 6mm nut that > hard?). Includes the actuator bracket and 4mm nuts and bolts. $25 each set > plus shipping. > > Will include stamped steel pump brackets if you want, free, they seem > magnetically attracted to me and I have a bunch. Have pic if you want to > see. > Andrew > > ------------------------------ > > End of alfa-digest V10 #2564 > **************************** -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
