The recess is a shift detent, meant to hold that very same ball bearing (if my memory serves me well)
IT Compliance Manager| DENTSPLY | Website: www.dentsply.com phone: 717.699.4187 | email: [email protected] | fax: 717.849.4764 570 W. College Avenue, York PA 17404 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, August 02, 2012 2:51 PM To: [email protected] Subject: [alfa] Re: alfa-digest V10 #2606 Gentle Alfisti, I found a ball bearing beneath the shift lever of my Sprint GT as I removed it in preparation of pulling the motor. The parts pages do not indicate any such ball bearing. The transmission stub has a recess that sure looks like it's meant to receive something...any ideas, Digest? modelle 115, 105 -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected] ____________________ This message contains confidential information intended only for the use of the addressee(s) named above and may contain information that is legally privileged. If you are not the addressee, or the person responsible for delivering it to the addressee, you are hereby notified that reading, disseminating, distributing or copying this message is strictly prohibited. If you have received this message by mistake, please immediately notify us by replying to the message and delete the original message immediately thereafter. Thank you. Any views expressed in this message are those of the individual sender, except where the sender specifies and with authority, states them to be the views of DENTSPLY INTERNATIONAL INC. -- to be removed from alfa, see http://www.digest.net/bin/digest-subs.cgi or email "unsubscribe alfa" to [email protected]
