Le 21/02/2020 à 21:30, Alan Feuerbacher a écrit : > On Thu, 2020-02-20 at 23:12 -0600, Bruce Dubbs wrote: >> On 2/20/20 10:56 PM, Alan Feuerbacher wrote: >>> On Thu, 2020-02-20 at 21:13 -0600, Douglas R. Reno wrote: >>>> On 2/20/20 8:16 PM, Alan Feuerbacher wrote: >>>>> I managed to get the configuration settings right enough that >>>>> jhalfs >>>>> builds a lot of packages, but it stops with this: >>>>> >>> SNIP >>> >>>>> I'm probably missing something. Helpful hints? >>>>> >>>>> Alan >>>>> >>>> I've been consistently getting this problem as well, and I've >>>> never >>>> figured out what caused it. Are you using the latest bash from >>>> LFS? >>>> >>>> >>>> Normally what I do to fix this is: >>>> >>>> >>>> sudo chown -v root:root /mnt/lfs/jhalfs/envars >>> >>> Presumably you mean /mnt/build_dir/jhalfs/envars , since build_dir >>> is >>> what the jhalfs README recommends instead of lfs. >> >> My distro, my rules. I like /mnt/lfs. The is a setting in jhalfs to >> change the build directory. >> >> >>>> And then restart jhalfs. It'll pick up from there and continue as >>>> normal. >>> >>> Here's what it spit back after doing the above and then "make": >>> >>> ################## >>> [alan@localhost jhalfs]$ make >>> ----------------------------------------------------------------- >>> ------ >>> mk_CHROOT >>> You are going to CHROOT into /mnt/build_dir lfs >>> a password is required >>> [sudo] password for alan: >>> ----------------------------------------------------------------- >>> ------ >>> Building target 064-util-linux >>> [|/tools/bin/bash: line 1: /mnt/build_dir/jhalfs/test-logs/064- >>> util- >>> linux-2.35.1: No such file or directory >>> make: *** [Makefile:597: 064-util-linux] Error 1 >>> make: *** [Makefile:103: mk_CHROOT] Error 2 >>> ###################### >>> >> >> rm -rf /mnt/build_dir/<everything except sources> >> >> and start over. Your sources should all be in >> /mnt/build_dir/sources. >> >> Check the sources with 'md5sum -c md5sums' where the md5sums file is >> generated from the xml sources when the book is built and copied to >> /mnt/build_dir/sources/ >> > Done. We got up to the same point and had the same error as before: > > ################################# > . . . > --------------------------------------------------------------------- > ----------- > Building target 064-util-linux > [+++++++++++++++++++++++++++++ ] 1 min. > 28 sec > Target 064-util-linux OK > --------------------------------------------------------------------- > ----------- > --------------------------------------------------------------------- > ----------- > Building target 065-xz > [+++++++++++++++++++ ] 0 min. > 18 sec > Target 065-xz OK > --------------------------------------------------------------------- > ----------- > --------------------------------------------------------------------- > ----------- > Building target 066-stripping > [- ] 0 min. > 0 sec > Target 066-stripping OK > --------------------------------------------------------------------- > ----------- > make: Leaving directory '/mnt/build_dir/jhalfs' > [sudo] password for alan: > --------------------------------------------------------------------- > ----------- > Building target restore-luser-env > > Target restore-luser-env OK > --------------------------------------------------------------------- > ----------- > --------------------------------------------------------------------- > ----------- > Building target 067-changingowner > [+ ] 0 min. > 0 sec > Target 067-changingowner OK > --------------------------------------------------------------------- > ----------- > --------------------------------------------------------------------- > ----------- > Building target 069-kernfs > [\ ] 0 min. > 0 sec > Target 069-kernfs OK > --------------------------------------------------------------------- > ----------- > mkdir -pv /mnt/build_dir/run/systemd/resolve > mkdir: created directory '/mnt/build_dir/run/systemd' > mkdir: created directory '/mnt/build_dir/run/systemd/resolve' > cp -v /etc/resolv.conf /mnt/build_dir/run/systemd/resolve > '/etc/resolv.conf' -> '/mnt/build_dir/run/systemd/resolve/resolv.conf' > --------------------------------------------------------------------- > ----------- > mk_CHROOT > You are going to CHROOT into /mnt/build_dir lfs > a password is required > --------------------------------------------------------------------- > ----------- > Building target 072-creatingdirs > [|/tools/bin/bash: envars: Permission denied ] 0 min. > 0 sec > make: *** [Makefile:650: 072-creatingdirs] Error 1 > make[1]: *** [Makefile:103: mk_CHROOT] Error 2 > make[1]: Leaving directory '/mnt/build_dir/jhalfs' > > > ERROR: Error 2 at common/common-functions line 39! > > <jhalfs> exit > make: *** [Makefile:12: all] Error 2 > ################################# > > Info from previous email about this problem: > > ################################# > [alan@localhost jhalfs]$ ll /mnt/build_dir/jhalfs/envars > -rw-r--r--. 1 lfs root 0 Feb 21 12:53 /mnt/build_dir/jhalfs/envars > > [alan@localhost jhalfs]$ ll -d /mnt/build_dir/jhalfs/ > drwxrwxrwt. 9 alan alan 4096 Feb 21 12:53 /mnt/build_dir/jhalfs/ > ################################# > > Since I started over, jhalfs generated a new configuration file: > > ################################# > [alan@localhost jhalfs]$ cat configuration > # Generated by Kconfiglib (https://github.com/ulfalizer/Kconfiglib) > > # > # BOOK Settings > # > # BOOK_LFS is not set > BOOK_LFS_SYSD=y > # BOOK_CLFS is not set > # BOOK_CLFS2 is not set > # BOOK_CLFS3 is not set > # BOOK_BLFS is not set > INITSYS="systemd" > PROGNAME="lfs" > RUN_ME="./jhalfs run" > relSVN=y > # WORKING_COPY is not set > # BRANCH is not set > PLATFORM="GENERIC" > SPARC64_PROC="none" > BLFS_TOOL=y > > # > # blfs-tool dependencies > # > DEP_LIBXML=y > DEP_LIBXSLT=y > DEP_DBXML=y > DEP_LYNX=y > DEP_SUDO=y > DEP_WGET=y > DEP_GPM=y > DEP_SVN=y > # end of blfs-tool dependencies > > BLFS_SVN=y > # BLFS_WORKING_COPY is not set > # BLFS_BRANCH is not set > BLFS_ROOT="/blfs_root" > BLFS_XML="blfs-xml" > LFS_XML="lfs-xml" > # CUSTOM_TOOLS is not set > TRACKING_DIR="/var/lib/jhalfs/BLFS" > # end of BOOK Settings > > # > # General Settings > # > LUSER="lfs" > LGROUP="lfs" > LHOME="/home" > BUILDDIR="/mnt/build_dir" > GETPKG=y > SRC_ARCHIVE="/srcsjhalfs" > RETRYSRCDOWNLOAD=y > RETRYDOWNLOADCNT=20 > DOWNLOADTIMEOUT=30 > SERVER="http://ftp.osuosl.org"; > RUNMAKE=y > # CLEAN is not set > # end of General Settings > > # > # Build Settings > # > CONFIG_TESTS=y > > # > # Test settings > # > TST_1=y > # TST_2 is not set > # TST_3 is not set > NO_BOMB=y > # BOMB is not set > # end of Test settings > > TEST=1 > # PKGMNGT is not set > INSTALL_LOG=y > # STRIP is not set > DEL_LA_FILES=y > # NO_PROGRESS_BAR is not set > # end of Build Settings > > # > # System configuration > # > HAVE_FSTAB=y > FSTAB="$SRC_ARCHIVE/fstablfs" > CONFIG_BUILD_KERNEL=y > CONFIG="$SRC_ARCHIVE/config-5.5.3" > # NCURSES5 is not set > TIMEZONE="GMT" > LANG="en_US.UTF-8" > # FULL_LOCALE is not set > PAGE_LETTER=y > # PAGE_A4 is not set > PAGE="letter" > HOSTNAME="**EDITME**" > > # > # Network configuration > # > INTERFACE="enp0s31f6" > IP_ADDR="10.0.2.9" > GATEWAY="10.0.2.2" > PREFIX="24" > BROADCAST="10.0.2.255" > DOMAIN="local" > DNS1="127.0.0.1" > DNS2="127.0.1.1" > # end of Network configuration > > # > # Console configuration > # > FONT="lat0-16" > KEYMAP="us" > # LOCAL is not set > # end of Console configuration > # end of System configuration > > # > # Advanced Features > # > REPORT=y > # COMPARE is not set > # CONFIG_OPTIMIZE is not set > OPTIMIZE=0 > > # > # Internal Settings (WARNING: for jhalfs developers only) > # > SCRIPT_ROOT="jhalfs" > JHALFSDIR="$BUILDDIR/$SCRIPT_ROOT" > LOGDIRBASE="logs" > LOGDIR="$JHALFSDIR/$LOGDIRBASE" > TESTLOGDIRBASE="test-logs" > TESTLOGDIR="$JHALFSDIR/$TESTLOGDIRBASE" > FILELOGDIRBASE="installed-files" > FILELOGDIR="$JHALFSDIR/$FILELOGDIRBASE" > ICALOGDIR="$LOGDIR/ICA" > MKFILE="$JHALFSDIR/Makefile" > XSL="$PROGNAME.xsl" > PKG_LST="unpacked" > # end of Internal Settings (WARNING: for jhalfs developers only) > # end of Advanced Features > > # REBUILD_MAKEFILE is not set > ################################# > > I'm not clear about something: the configuration file contains these > lines: > > ################################# > # General Settings > # > LUSER="lfs" > LGROUP="lfs" > LHOME="/home" > ################################# > > But I can find nothing in the Menu program that corresponds with these. > Can you explain what this stuff means? I'm wondering especially because > the error messages above have this: > > ################################# > mk_CHROOT > You are going to CHROOT into /mnt/build_dir lfs > a password is required > --------------------------------------------------------------------- > ----------- > Building target 072-creatingdirs > [|/tools/bin/bash: envars: Permission denied ] 0 min. > 0 sec > ################################# > > There is an "lfs" user on my Fedora host left over from manually > building LFS, but I see nothing in the jhalfs documentation about an > "lfs" user. > > Perhaps a bit more info will be helpful in figuring this out: > > My jhalfs directory structures: > > This is just a general place to store information. The "jhalfs" > directory listed is from the svn download: > "svn co svn://svn.linuxfromscratch.org/ALFS/jhalfs/trunk jhalfs" > This directory is where I've executed "make": > [alan@localhost Jhalfs]$ ll /home/alan/Jhalfs/ > total 32 > drwxrwxr-x. 2 alan wheel 4096 Feb 20 16:36 BitsFromsdd > drwxrwxr-x. 15 alan wheel 4096 Feb 20 19:00 jhalfs > -rw-rw-r--. 1 alan wheel 23788 Feb 8 10:44 jhalfslog > > After executing "make", the directory /mnt/build_dir is populated in > the way I expect: > > ################################# > [alan@localhost jhalfs]$ cd /mnt/build_dir/ > [alan@localhost build_dir]$ ll > total 48 > drwxr-xr-x. 11 alan alan 4096 Feb 21 11:48 blfs_root > drwxr-xr-x. 3 root root 4096 Feb 21 11:13 boot > drwxr-xr-x. 24 root root 4880 Feb 21 11:20 dev > drwxr-xr-x. 2 root root 4096 Feb 21 11:13 home > drwxrwxrwt. 9 alan alan 4096 Feb 21 12:53 jhalfs > drwx------. 2 root root 16384 Feb 20 16:16 lost+found > drwxr-xr-x. 2 root root 4096 Feb 21 11:13 opt > dr-xr-xr-x. 289 root root 0 Feb 21 11:19 proc > drwxrwxrwt. 3 root root 60 Feb 21 12:53 run > drwxrwxrwt. 2 root root 4096 Feb 21 12:51 sources > dr-xr-xr-x. 13 root root 0 Feb 21 11:19 sys > drwxr-xr-x. 12 root root 4096 Feb 21 12:51 tools > drwxr-xr-x. 3 root root 4096 Feb 21 11:48 var > ################################# > > I'm not sure why root ends up as the owner and group for most of the > directories. > > Alan >
I'm not sure what to do. You and Douglas seem to have the same problem but Bruce and I don't, and I've tried to reproduce it to no avail. I suggested to Douglas to edit the Makefile in /mnt/build_dir/jhalfs before starting the build: after the line "mk_SUDO: mk_LUSER", add: <tab>chown -v root:root $(MOUNT_PT)/jhalfs/envars Pierre -- http://lists.linuxfromscratch.org/listinfo/alfs-discuss FAQ: http://www.linuxfromscratch.org/faq/ Unsubscribe: See the above information page
