I've run a recording test in GoldWave and both channels are peaking at -76db (no signal detected).
On 4/19/18, Danny Miles <[email protected]> wrote: > It's a Behringer UCA-222 USB soundcard. I've ticked "listen to > device" for both recording and playback and have also checked that > both playback and recording have it as the default windows device/have > it enabled. > > On 4/19/18, Hamit Campos <[email protected]> wrote: >> So what kinda card is this? Is this 1 of them pro ones qith XLRs and >> what not? Cause some do let you and this is key mix your PC audio in but >> most don't even do this. Yeah sounds like you want something like What >> You hear. But Pro cards which are given that fancy turm audio interface >> don't have this. Only things like the Sound Blasters or the built in >> Realtech card if you're lucky. >> >> >> On 4/19/2018 8:23 AM, Danny Miles wrote: >>> Hi everyone. I hope you're doing well. >>> >>> I'm trying to re-connect my USB soundcard (Behringer UCA-222) to my >>> laptop and the Alto Professional ZMX52 audio interface. I've >>> uninstalled and reinstalled the soundcard drivers (successfully, >>> according to the notification) and I've wired my inputs and outputs to >>> the correct places on both the mixer and soundcard. I know I've got >>> the right ones because I'm getting content playing into my headphones >>> (plugged into the mixer) via the soundcard, both from the laptop and >>> from my digital radio. I've also managed to record from my laptop's >>> soundcard and then play it through the mixer but, for a reason that I >>> can't possibly fathom, I'm completely unable to record a signal >>> through the mixer (such as a station from my digital radio). The >>> software is recording, as there's dead air in my headphones and a file >>> duration is displayed, so I'm at a complete loss as to what might be >>> causing the issue. The only thing I can think of is the soundcard >>> drivers but they're obviously working to some extent ... I may even >>> have got a temporary sound recording out of them but, if so, it >>> stopped working as soon as it started which leads me to assume that >>> things aren't as they should be with the installation (after all, when >>> I re-installed the drivers and re-booted the laptop, everything >>> continued to feed out of the laptop's soundcard rather than reverting >>> to the USB soundcard and coming out of the mixer). >>> >>> Apologies for the long, rambling and probably confusing post ... any >>> advice will be gratefully received. >>> >>> >>> >> >> >> >> >> >> > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#575): https://groups.io/g/all-audio/message/575 View All Messages In Topic (5): https://groups.io/g/all-audio/topic/17569340 Mute This Topic: https://groups.io/mt/17569340/21656 New Topic: https://groups.io/g/all-audio/post Change Your Subscription: https://groups.io/g/all-audio/editsub/21656 Group Home: https://groups.io/g/all-audio Contact Group Owner: [email protected] Terms of Service: https://groups.io/static/tos Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy -=-=-=-=-=-=-=-=-=-=-=-
