You need to remove one screw FROM THE BATTERY COVER As you install the battery from the rear the it goes in right side up with the posative pole on the left
On face of meter: Top button on left is hold/select Button on left is true/average Here are the settings on the 28 position rotary knob The initial value is the number of clicks clockwise from noon Noon off 1 Hfe 2 200mV dc 3 2 vdc 4 20 vdc 5 200 vdc 6 1000 vdc 7 750 volts / hertz 8 200 vac 9 20 vac 10 2 vac 11 20 uA dc 12 2 mA dc 13 20 mA dc 14 200 mA dc 15 10 amps dc 16 10 amps ac 17 200 mA ac 18 20 mA ac 19 NCV (electric field sensor) 20 diode power on test 21 200 ohms 22 2 kohms 23 20 kohms 24 200 kohms 25 2 meg ohms 26 20 meg ohms 27 Capacitance 20 mF probe connections left to right: 10 amps Milli Amps Common Volts/ohms/hertz https://www.mpja.com/Talking-Digital-Multimeter/productinfo/35042+ME Talking Digital Multi meter 35042 TE Stock No: 35042 ME Order directly from here or call 1-800-652-6733 There is a video you can listen to on this page. Talking, High tech. 10 function, Backlit, 3-1/2" digit hand held meter with 1" LCD display. True RMS/Average Measurement Selection Includes 9V battery, test leads, instructions Fuse Overload protection. CE listed; IEC 1010 Cat III-1000V Compliant NOTES: 1: To Turn OFF Voice; Press and Hold (~3sec.) "TRUE/AVG" Button 2: To Read Frequency: Select 750VAC Range- Press"HOLD/SELECT" 3: To Turn on Backlight: Press & Hold (~3sec.) "HOLD/SELECT" Button Backlight will turn off after ~10seconds 4: Meter is Auto Off will turn off after ~20min SPECIFICATIONS DC VOLTS & CURRENT Volts: .2,2,20,200,1000V Accuracy: .5% + 3 Counts on 200mV-200V .8% + 10 Counts 1000VDC Current: 20uA, 2mA, 20mA, 200mA,10A Accuracy: .8% + 10 Counts on 20ua & 2mA 2% + 30 Counts on 20mA-10A AC VOLTS (RMS/AVG) Frequency Response: Sine/Triangle: 40Hz-1KHz Other Waveform: 40Hz-200Hz Volts: .2,2,20,200,750V Accuracy: .8% + 5 Counts on .2-200V 1.2% +10Counts on 750V Current: 20mA, 200mA, 10A Accuracy: 2% + 30 Counts RESISTANCE Ranges: 200,2K,20K,200K,2M,20M Ohms Accuracy: .8% + 5 Counts on 200 ohm .8% + 3 Counts on 2K-2M 1% + 25 Counts on 20M CAPACITANCE Ranges: 20nF, 200nF, 2uF, 20uF, 200uF, 2mF, 20mF Accuracy: 3.5% + 20 Counts on 20nF-20uF 5% + 10 Counts on 200uF-20mf OTHER FUNCTIONS Frequency: (Select 750VAC Range- Press"Hold/Select" Button Diode Test: ~3-4VDC open circuit hFE: ~1mA test current NCV: "Near Field AC" Beep Rate High for near/Low for far L: 7-1/4" W: 3-1/2 T: 1-7/8" WT: 1.2 -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2074): https://groups.io/g/all-audio/message/2074 Mute This Topic: https://groups.io/mt/30190321/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-