A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Multiprotocol Label Switching Working Group of the
IETF.
Title : Fault Tolerance for the Label Distribution Protocol
(LDP)
Author(s) : A. Farrel
Filename : draft-ietf-mpls-ldp-ft-06.txt
Pages : 53
Date : 2002-9-30
Multiprotocol Label Switching (MPLS) systems will be used
in core networks where system downtime must be kept to an
absolute minimum. Many MPLS Label Switching Routers
(LSRs) may, therefore, exploit Fault Tolerant (FT)
hardware or software to provide high availability of the
core networks.
The details of how FT is achieved for the various
components of an FT LSR, including Label Distribution
Protocol (LDP), the switching hardware and TCP, are
implementation specific. This document identifies issues
in the LDP specification in RFC 3036 'LDP Specification'
that make it difficult to implement an FT LSR using the
current LDP protocols, and proposes enhancements to the
LDP specification to ease such FT LSR implementations.
The issues and extensions described here are equally
applicable to RFC 3212, 'Constraint-Based LSP Setup Using
LDP' (CR-LDP).
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mpls-ldp-ft-06.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-mpls-ldp-ft-06.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
[EMAIL PROTECTED]
In the body type:
"FILE /internet-drafts/draft-ietf-mpls-ldp-ft-06.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-mpls-ldp-ft-06.txt>
-
