A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Traffic Engineering Extensions to OSPF for Generalized
MPLS control of Sonet/SDH Networks
Author(s) : E. Mannie, D. Papadimitriou
Filename : draft-mannie-ccamp-gmpls-sonet-sdh-ospf-00.txt
Pages : 0
Date : 2002-11-8
This document introduces the traffic engineering extensions required
in existing IGP protocols to support sub-sequent signalling for
Label Switched Path (LSP) when using Generalized MPLS (GMPLS)
signalling as defined in [GMPLS-SIG] and [GMPLS-SONET-SDH] for
Sonet/SDH Networks. In particular, using [GMPLS-RTG] as guideline,
it specifies the GMPLS routing traffic engineering extensions to
OSPF for Sonet/SDH networks.
Based on the Traffic Engineering (TE) extensions defined in [OSPF-
TE], the proposed approach is aligned with link bundling as defined
in [MPLS-BDL] and extends the TE Link sub-TLVs proposed in [GMPLS-
OSPF] by proposing several new sub-TLVs for Sonet/SDH networks. The
proposed extensions do not preclude any further integration with
these documents.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-00.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-mannie-ccamp-gmpls-sonet-sdh-ospf-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
[EMAIL PROTECTED]
In the body type:
"FILE /internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-00.txt>
-
