A New Internet-Draft is available from the on-line Internet-Drafts directories.


        Title           : Traffic Engineering Extensions to OSPF 
                          for Generalized MPLS control of Sonet/SDH Networks
        Author(s)       : E. Mannie, D. Papadimitriou
        Filename        : draft-mannie-ccamp-gmpls-sonet-sdh-ospf-01.txt
        Pages           : 18
        Date            : 2003-2-18
        
This document introduces the Sonet/SDH traffic engineering
extensions required for existing IGP protocols in support of
Generalized MPLS (GMPLS) signalling as defined in [RFC-3471] and
[GMPLS-SONET-SDH]. Using [GMPLS-RTG] as guideline, this memo
specifies the GMPLS routing traffic engineering extensions to OSPF
for Sonet/SDH networks.

Based on the Traffic Engineering (TE) extensions defined in [OSPF-
TE], the proposed approach is aligned with link bundling as defined
in [MPLS-BDL] and extends the set of Link sub-TLVs proposed in
[GMPLS-OSPF] to Sonet/SDH networks. The proposed extensions do not
preclude any further integration with the Interface Switching
Capability Descriptor specified in [GMPLS-OSPF].

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-01.txt

To remove yourself from the IETF Announcement list, send a message to 
ietf-announce-request with the word unsubscribe in the body of the message.

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
        "get draft-mannie-ccamp-gmpls-sonet-sdh-ospf-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
        [EMAIL PROTECTED]
In the body type:
        "FILE /internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-01.txt".
        
NOTE:   The mail server at ietf.org can return the document in
        MIME-encoded form by using the "mpack" utility.  To use this
        feature, insert the command "ENCODING mime" before the "FILE"
        command.  To decode the response(s), you will need "munpack" or
        a MIME-compliant mail reader.  Different MIME-compliant mail readers
        exhibit different behavior, especially when dealing with
        "multipart" MIME messages (i.e. documents which have been split
        up into multiple messages), so check your local documentation on
        how to manipulate these messages.
                
                
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-mannie-ccamp-gmpls-sonet-sdh-ospf-01.txt>

Reply via email to