To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=17466
------- Additional comments from [EMAIL PROTECTED] Mon Jan 24 08:14:21 -0800 2005 ------- 114 is broken. In 110 (contrary to what I said before), the user *must* must select the first icon (under printer "tab") for envelope to print properly. In 113, the user *must* select the icon that matches the way envelope feeds into printer. With 114, none of the icons (we tried all 6) produces an acceptable result. The 5th icon comes closest. Although 5th icon suggests center feed, we feed the C10 envolope on left side of manual tray and sender/recipient both print about 1/2 inch to left of where they should). We tested with plain piece of paper and found that if the C10 envelope were actually 11 inches wide, then address infor would have printed properly with 5th icon and left side fed. I'm printing to HP4. I don't remember what happened with 111 and 112, but I have copies if testing of these versions is required. --------------------------------------------------------------------- Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
