To comment on the following update, log in, then open the issue:
http://www.openoffice.org/issues/show_bug.cgi?id=53998
User aw changed the following:
What |Old value |New value
================================================================================
Assigned to|aw |afore
--------------------------------------------------------------------------------
------- Additional comments from [EMAIL PROTECTED] Wed Oct 26 07:46:03 -0700
2005 -------
AW: Thanks for sending the file via eMail.
I loaded the doc and took a look at the top left box, the line left from the
switch. It was not on the grid (I had to set the units to inch and the grid to
0,1 first). Moved start and end point of line, they snapped to the grid. Saved
(in *.odg format), reloaded -> still on grid, on new positions. Cannot see a
problem here.
Another case are connectors, e.g. between the DAC and the VI_2 box. This
connector is connected to the glue points of the two boxes. The geometric info
of the connector is just the boundrects of the two objects it is connected to,
and it's layout rules. From that info, the path is recreated. It's not the path
which is saved.
The glue points are on half height of the objects, and as can be seen, the half
heights of the boxes are not on the same vertical axis, so the connector cannot
directly connect them. If You want the connector to be straight, You have to
align the two boxes accordingly (select the two boxes, context menu, align ->
verical, centered). That's how connectors are defined.
I am sorry, but up to now i could not find an error. If You still see one, mabe
You can create a document with just one page and the objects which make trouble
and a step-by-step description? And send back to me in that case. Thanks in
advance.
---------------------------------------------------------------------
Please do not reply to this automatically generated notification from
Issue Tracker. Please log onto the website and enter your comments.
http://qa.openoffice.org/issue_handling/project_issues.html#notification
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
