To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=71763
------- Additional comments from [EMAIL PROTECTED] Wed Nov 22 03:22:18 -0800 2006 ------- Perhaps I can add a few details which might help. -Select the flow chart objects and connector lines -Move the selection by dragging it some distance (+x, +y). -Undo -Redo The redo will return the flow chart objects to the new location. Most interestingly, the connector lines appear to be drawn at (+2x, +2y) relative to their original position. I dont know if this detail will help track down what is going on - it is as if, when 'redoing' the move, the move is applied TWICE to the connector objects. Further, the objects ARE still associated with the respective glue points on the flow chart objects. Following the above procedure, if the selected objects are moved again, the connectors 'jump back' to the flow chart objects! Saving the file also causes the misdrawn connectors to 'jump back'. Does the save operation perhaps cause the connector positions to be recalculated, based on the positions of the objects to which they are attached? Just some observations which I hope might be of assistance. For any more info please ask. Richard. --------------------------------------------------------------------- Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
