Update of /cvsroot/alsa/alsa-driver/utils
In directory usw-pr-cvs1:/tmp/cvs-serv18893
Added Files:
alsaconf
Log Message:
added alsaconf script.
this will probe one pnp card as default.
a legacy card without pnp can be probed, but this may be a bit
dangerous.
--- NEW FILE: alsaconf ---
#!/bin/sh
#
# ALSA Configurator
#
# Copyright (c) 1999-2002 SuSE GmbH
# Jan ONDREJ
#
# written by Takashi Iwai <[EMAIL PROTECTED]>
# Bernd Kaindl <[EMAIL PROTECTED]>
#
# based on the original version of Jan ONDREJ's alsaconf for ALSA 0.4.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
version=0.9.0
# Check for root privileges
if [ `id -u` -ne 0 ]; then
echo "You must be root to use this script."
exit 1
fi
function usage() {
echo "ALSA configurator version $version"
echo "usage: alsaconf [options]"
echo " -l|--legacy check only legacy non-isapnp cards"
echo " -m|--modinfo read module descriptions instead of reading card db"
echo " -s|--sound wav-file"
echo " use the specified wav file as a test sound"
echo " -u|--uid uid set the uid for the ALSA devices (default = 0)"
echo " -g|--gid gid set the gid for the ALSA devices (default = 0)"
echo " -d|--devmode mode"
echo " set the device mode for the ALSA devices (default = 0666)"
echo " -r|--strict set strict device mode (equiv. with -g 17 -d 0660)"
echo " -L|--log logging on $LOGFILE"
echo " -p|--probe card-name"
echo " probe a legacy non-isapnp card and print module options"
echo " -h|--help what you're reading"
exit 1
}
OPTS=`getopt -o lmLhp:u:g:d:rs: --long
legacy,modinfo,log,help,probe,uid,gid,devmode,strict,sound -n alsaconf -- "$@"` ||
exit 1
eval set -- "$OPTS"
do_legacy_only=0
use_modinfo_db=0
do_logging=0
alsa_uid=0
alsa_gid=0
alsa_mode=0666
legacy_probe_card=""
LOGFILE=/tmp/alsaconf.log
TESTSOUND=/usr/share/sounds/alsa/test.wav
try_all_combination=0
while true ; do
case "$1" in
-l|--legacy)
do_legacy_only=1; shift ;;
-m|--modifno)
use_modinfo_db=1; shift ;;
-s|--sound)
TESTSOUND=$2; shift 2;;
-h|--help)
usage; exit 1 ;;
-L|--log)
do_logging=1; rm -f $LOGFILE; shift;;
-p|--probe)
legacy_probe_card=$2; shift 2;;
-u|--uid)
alsa_uid=$2; shift 2;;
-g|--gid)
alsa_gid=$2; shift 2;;
-d|--devmode)
alsa_mode=$2; shift 2;;
-r|--strict)
alsa_uid=0; alsa_gid=17; alsa_mode=0660; shift;;
--) shift ; break ;;
*) usage ; exit 1 ;;
esac
done
alsa_device_opts=""
if [ x"$alsa_uid" != x0 ]; then
alsa_device_opts="$alsa_device_opts ${mpfx}device_uid=$alsa_uid"
fi
if [ x"$alsa_gid" != x0 ]; then
alsa_device_opts="$alsa_device_opts ${mpfx}device_gid=$alsa_gid"
fi
if [ x"$alsa_mode" != x0 ]; then
alsa_device_opts="$alsa_device_opts ${mpfx}device_mode=$alsa_mode"
fi
if [ -e /etc/modules.conf ]; then
cfgfile="/etc/modules.conf"
elif [ -e /etc/conf.modules ]; then
cfgfile="/etc/conf.modules"
else
cfgfile="/etc/modules.conf"
touch /etc/modules.conf
fi
#
# check the snd_ prefix for ALSA module options
# snd_ prefix is obsoleted since 0.9.0rc4.
#
if modinfo -p snd | grep -q snd_ ; then
mpfx="snd_"
else
mpfx=""
fi
# Check for dialog, whiptail, gdialog, awk, ... ?
if which dialog > /dev/null; then
DIALOG=dialog
else
if which whiptail > /dev/null; then
function whiptail_wrapper() {
X1="$1"
X2="$2"
if [ $1 = --yesno ]; then
X3=`expr $3 + 2`
else
X3=$3
fi
shift 3
whiptail "$X1" "$X2" $X3 "$@"
}
DIALOG=whiptail_wrapper
else
echo "Error, dialog or whiptail not found."
exit 1
fi
fi
if which awk > /dev/null; then :
else
echo "Error, awk not found. Can't continue."
exit 1
fi
#
# remove entries by yast2 sound configurator
#
function remove_y2_block() {
awk '
/^alias sound-slot-[0-9]/ { next }
/^alias char-major-116 / { next }
/^alias char-major-14 / { next }
/^alias snd-card-[0-9] / { next }
/^options snd / { next }
/^options snd-/ { next }
/^options off / { next }
/^alias sound-service-[0-9]/ { next }
/^# YaST2: sound / { next }
{ print }'
}
#
# remove entries by sndconfig sound configurator
#
# found strings to search for in WriteConfModules,
# from sndconfig 0.68-4 (rawhide version)
function remove_sndconfig_block() {
awk '
/^alias sound-slot-0/ { modulename = $3 ; next }
/^alias sound-slot-[0-9]/ { next }
/^post-install sound-slot-[0-9] / { next }
/^pre-remove sound-slot-[0-9] / { next }
/^options sound / { next }
/^alias synth0 opl3/ { next }
/^options opl3 / { next }
/^alias midi / { mididev = $3 ; next }
/^options / { if ($2 == mididev) next }
/^pre-install / { if ($2 == mididev) next }
/^alias synth0 / { synth = $3 ; next }
/^post-install / { if ($2 == synth) next }
/^options sb / { next }
/^post-install .+ \/bin\/modprobe "aci"/ { if ($2 == modulename) next }
/^options adlib_card / { next }
/^options .+ isapnp=1/ { if ($2 == modulename) next }
/^options i810_audio / { next }
/^options / {if ($2 == modulename) next }
{ print }'
}
#
# remove the previous configuration by alsaconf
#
function remove_ac_block() {
awk '/^'"$ACB"'$/,/^'"$ACE"'$/ { next } { print }'
}
#
# set default mixer volumes
#
function mixer() {
amixer set "$1" "$2" unmute >/dev/null 2>&1
}
function set_mixers() {
mixer Master 75%
mixer PCM 90%
mixer Synth 90%
mixer CD 90%
# ESS 1969 chipset has 2 PCM channels
mixer PCM,1 90%
# Trident/YMFPCI/emu10k1
mixer Wave 100%
mixer Music 100%
# CS4237B chipset:
mixer 'Master Digital' 75%
# Envy24 chips with analog outs
mixer DAC,0 90%
mixer DAC,1 90%
# some notebooks use headphone instead of master
mixer Headphone 75%
}
# INTRO
function intro() {
$DIALOG --msgbox "
ALSA CONFIGURATOR
v$version
This script is a configurator for
Advanced Linux Sound Architecture (ALSA) driver.
If ALSA is already running, you should close all sound
apps now and stop the sound driver.
alsaconf will try to do this, but it's not 100% sure.
" 20 63 || acex 0
}
# FAREWELL
function farewell() {
$DIALOG --msgbox "
$*
ALSA CONFIGURATOR
will prepare the card for playing now.
Now I'll run 'alsasound start', then I'll use
amixer to raise the default volumes.
You can change the volume later via a mixer
program such as alsamixer or gamix.
" 17 60 || acex 0
}
# Exit function
function acex() {
cleanup
clear
exit $1
}
#
# search for alsasound init script
#
if [ -x /etc/init.d/alsasound ]; then
rcalsasound=/etc/init.d/alsasound
elif [ -x /usr/sbin/rcalsasound ]; then
rcalsasound=/usr/sbin/rcalsasound
elif [ -x /sbin/rcalsasound ]; then
rcalsasound=/sbin/rcalsasound
else
rcalsasound=rcalsasound
fi
# MAIN
if [ -d /proc/asound ]; then
$rcalsasound stop >/dev/null 2>&1
/sbin/rmmod dmasound dmasound_awacs 2>/dev/null
fi
TMP=`mktemp -q /tmp/alsaconf.XXXXXX`
if [ $? -ne 0 ]; then
echo "$0: Can't create temp file, exiting..."
exit 1
fi
FOUND=`mktemp -q /tmp/alsaconf.XXXXXX`
if [ $? -ne 0 ]; then
echo "$0: Can't create temp file, exiting..."
exit 1
fi
DUMP=`mktemp -q /tmp/alsaconf.XXXXXX`
if [ $? -ne 0 ]; then
echo "$0: Can't create temp file, exiting..."
exit 1
fi
cleanup () {
killall -9 aplay arecord >/dev/null 2>&1
/sbin/modprobe -r isapnp >/dev/null 2>&1
/sbin/modprobe -r isa-pnp >/dev/null 2>&1
rm -f "$TMP" "$FOUND" "$DUMP"
}
trap cleanup 0
# convert ISA PnP id number to string 'ABC'
function convert_isapnp_id () {
let a='('$1'>>2) & 0x3f'
let b='(('$1' & 0x03) << 3) | (('$1' >> 13) & 0x07)'
let c='('$1'>> 8) & 0x1f'
strs='@ABCDEFGHIJKLMNOPQRSTUVWXYZ'
echo ${strs:$a:1}${strs:$b:1}${strs:$c:1}
}
# swap high & low bytes
function swap_number () {
let v='(('$1'>>8)&0xff)|(('$1'&0xff)<<8)'
printf "%04x" $v
}
# build card database
# build_card_db filename
function build_card_db () {
MODDIR=/lib/modules/`uname -r`
last_driver=""
echo -n > $1
# list pci cards
while read driver vendor device dummy; do
if expr $driver : 'snd-.*' >/dev/null ; then
if [ "$last_driver" != "$driver" ]; then
echo $driver.o
last_driver=$driver
fi
id1=`printf '0x%04x' $vendor`
id2=`printf '0x%04x' $device`
echo "PCI: $id1=$id2"
fi
done < $MODDIR/modules.pcimap >> $1
# list isapnp cards
while read driver cardvendor carddevice data vendor func; do
if expr $driver : 'snd-.*' >/dev/null ; then
if [ "$last_driver" != "$driver" ]; then
echo $driver.o
last_driver=$driver
fi
id1=`convert_isapnp_id $cardvendor`
dev1=`swap_number $carddevice`
id2=`convert_isapnp_id $vendor`
dev2=`swap_number $func`
echo "ISAPNP: $id1$dev1=$id2$dev2"
fi
done < $MODDIR/modules.isapnpmap >> $1
}
#
# probe cards
#
function probe_cards () {
test -r /proc/isapnp || /sbin/modprobe isapnp >/dev/null 2>&1
test -r /proc/isapnp || /sbin/modprobe isa-pnp >/dev/null 2>&1
if [ -r /proc/isapnp ]; then
cat /proc/isapnp >"$DUMP"
else
echo -n >"$DUMP"
fi
CARDID_DB=/var/tmp/alsaconf.cards
if [ ! -r $CARDID_DB ]; then
use_modinfo_db=1
fi
if [ $use_modinfo_db != 1 ]; then
if [ $CARDID_DB -ot /lib/modules/`uname -r`/modules.dep ]; then
use_modinfo_db=1
fi
fi
if [ $use_modinfo_db = 1 ]; then
echo "Building card database.."
build_card_db $CARDID_DB
fi
if [ ! -r $CARDID_DB ]; then
echo "No card database is found.."
exit 1
fi
ncards=`grep '^snd-.*\.o$' $CARDID_DB | wc -w`
awk '
BEGIN {
format="%-40s %s\n";
ncards='"$ncards"';
idx=0;
}
/^snd-.*\.o$/{
sub(/.o$/, "");
driver=$0;
perc=(idx * 100) / (ncards + 1);
print perc;
idx++;
}
/^[[:space:]]*PCI: /{
gsub(/0x/, "");
gsub(/=/, ":");
x = sprintf ("/sbin/lspci -n | grep '"'Class 0401'"' | grep %s", $2);
if (system (x) == 0)
printf "%s %s\n", $2, driver >>"'"$FOUND"'"
}
/^[[:space:]]*ISAPNP: /{
gsub(/=.*/, "");
x = sprintf ("grep '\''^Card [0-9] .%s:'\'' '"$DUMP"'", $2);
if (system (x) == 0)
printf "%s %s\n", $2, driver >>"'"$FOUND"'"
}' < $CARDID_DB |\
$DIALOG --gauge "Searching sound cards" 6 40 0
#
# PowerMac
#
if grep -q MacRISC /proc/cpuinfo; then
/sbin/modprobe -a -l | grep 'snd-powermac' | \
while read i; do
i=${i##*/}
i=${i%%.o}
echo "PowerMac $i" >> $FOUND
done
fi
}
#
# look for a descriptive device name from the given device id
#
function find_device_name () {
if expr "$1" : '[0-9a-f][0-9a-f][0-9a-f][0-9a-f]:[0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
>/dev/null; then
/sbin/lspci -d $1 | sed -e 's/^..:..\.. Multimedia audio controller: //g'
return
elif expr "$1" : '[A-Z@][A-Z@][A-Z@][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' >/dev/null;
then
cardname=`grep '^Card [0-9]\+ '\'$1':' $DUMP | head -1 | sed -e 's/^Card
[0-9]\+ '\''.*:\(.*\)'\'' .*$/\1/'`
echo $cardname
else
echo $1
fi
}
#
# configure and try test sound
#
function ac_config_card () {
CARD_DRIVER=snd-$1
CARD_OPTS="${*:2}"
if [ -z "$CARD_OPTS" ]; then
CARD_OPTS="${mpfx}index=0"
else
CARD_OPTS="${mpfx}index=0 $CARD_OPTS"
fi
# Configuration done
$DIALOG --yesno "
Configuring $CARD_DRIVER
Do you want to modify ${cfgfile}?" 8 50 || acex 0
clear
# Copy conf.modules and make changes.
ACB="# --- BEGIN: Generated by ALSACONF, do not edit. ---"
ACE="# --- END: Generated by ALSACONF, do not edit. ---"
# Detect 2.2.X kernel
KVER=`uname -r | tr ".-" " "`
KVER1=`echo $KVER | cut -d" " -f1`
KVER2=`echo $KVER | cut -d" " -f2`
if [ $KVER1 -ge 2 ] && [ $KVER2 -ge 2 ]; then
SOUND_CORE="soundcore"
else
SOUND_CORE="snd"
fi
if [ -e /etc/redhat-release ] ; then
if grep -q "Red Hat" /etc/redhat-release >/dev/null 2>&1 ; then
remove_ac_block < $cfgfile | remove_sndconfig_block | uniq > $TMP
fi
else
remove_ac_block < $cfgfile | remove_y2_block | uniq > $TMP
fi
echo "$ACB
# --- ALSACONF verion $version ---
alias char-major-116 snd
alias snd-card-0 $CARD_DRIVER
alias char-major-14 $SOUND_CORE
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd ${mpfx}major=116 ${mpfx}cards_limit=1$alsa_device_opts
options $CARD_DRIVER $CARD_OPTS
$ACE
" >> $TMP
if cp -f $cfgfile $cfgfile.old; then
:
else
echo "ERROR! $cfgfile could not be saved."
echo "Configured ALSA is in /tmp/alsaconf.saved."
cp $TMP /tmp/alsaconf.saved
exit 1
fi
cp -f $TMP $cfgfile
/sbin/depmod -a 2>/dev/null
# remove yast2 entries (- only for suse distro)
if [ -f /var/lib/YaST/unique.inf ]; then
awk '
BEGIN { in_sound=0; }
/^\[sound\]$/ { print; in_sound=1; next; }
/^\[.+\]$/ { print; in_sound=0; next; }
{ if (in_sound == 0) { print; } }
' < /var/lib/YaST/unique.inf > $TMP
cp -f $TMP /var/lib/YaST/unique.inf
fi
farewell "OK, driver $CARD_DRIVER is configured."
echo Loading driver..
$rcalsasound start
echo Setting default volumes..
if [ -x /usr/bin/set_default_volume ]; then
/usr/bin/set_default_volume -f
else
set_mixers
fi
if [ -f $TESTSOUND ]; then
if $DIALOG --yesno "
The mixer is set up now for for playing.
Shall I try to play a sound sample now?
NOTE:
If you have a big amplifier, lower your volumes or say no.
Otherwise check that your speaker volume is open,
and look if you can hear test sound.
" 13 65
then
echo
aplay $TESTSOUND
fi
fi
if [ ! -r /etc/asound.state ]; then
echo "Saving the mixer setup used for this in /etc/asound.state."
/usr/sbin/alsactl store
fi
cat <<END
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, please use alsamixer or gamix.
Have a lot of fun!
END
}
#
# probe legacy ISA cards
#
function check_dma_avail () {
if [ -r /proc/dma ]; then
list=""
for dma in $*; do
grep '^ *'$dma': ' /proc/dma >/dev/null 2>&1 || list="$list $dma"
done
echo $list
fi
}
function check_irq_avail () {
if [ -r /proc/interrupts ]; then
list=""
for irq in $*; do
grep '^ *'$irq': ' /proc/interrupts >/dev/null 2>&1 || list="$list $irq"
done
echo $list
fi
}
# check playback
# return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
function ac_try_load () {
echo "alias char-major-116 snd
alias snd-card-0 snd-card-$1
options snd ${mpfx}major=116 ${mpfx}cards_limit=1
options snd-$1 ${*:2}
" > $TMP
test $do_logging = 1 && echo "$1 ${*:2}" >> $LOGFILE
/sbin/modprobe -C $TMP snd-$1 >/dev/null 2>&1
/sbin/lsmod | grep snd-$1 >/dev/null 2>&1 || return 1
/sbin/modprobe -C $TMP snd-ioctl32 >/dev/null 2>&1
# mute mixers
amixer set Master 0% mute >/dev/null 2>&1
amixer set PCM 0% mute >/dev/null 2>&1
# output 0.5 sec
head -c 4000 < /dev/zero | aplay -r8000 -fS16_LE -traw -c1 > /dev/null 2>&1 &
# remember pid
pp=$!
# sleep for 2 seconds (to be sure -- 1 sec would be enough)
sleep 2
# kill the child process if still exists.
kill -9 $pp > /dev/null 2>&1
st=$?
/sbin/modprobe -C $TMP -r snd-ioctl32 >/dev/null 2>&1
/sbin/modprobe -C $TMP -r snd-$1 >/dev/null 2>&1
if [ $st = 0 ]; then
# irq problem?
test $do_logging = 1 && echo "no playback return" >> $LOGFILE
return 2
else
# seems ok!
test $do_logging = 1 && echo "playback OK" >> $LOGFILE
return 0
fi
}
# check capture
# return 0 - OK, 1 - NG, 2 - not working (irq/dma problem)
# ac_try_capture card duplex opts
function ac_try_capture () {
echo "alias char-major-116 snd
alias snd-card-0 snd-$1
options snd ${mpfx}major=116 ${mpfx}cards_limit=1
options snd-$1 ${*:3}
" > $TMP
test $do_logging = 1 && echo "$1 ${*:2}" >> $LOGFILE
/sbin/modprobe -C $TMP snd-$1 >/dev/null 2>&1
/sbin/lsmod | grep snd-$1 >/dev/null 2>&1 || return 1
/sbin/modprobe -C $TMP snd-ioctl32 >/dev/null 2>&1
# mute mixers
amixer set Master 0% mute >/dev/null 2>&1
amixer set PCM 0% mute >/dev/null 2>&1
play_pid=0
if [ $2 = yes ]; then
# try duplex - start dummy playing
aplay -r8000 -fS16_LE -traw -c1 < /dev/zero > /dev/null 2>&1 &
play_pid=$!
fi
# record 1sec
arecord -d1 > /dev/null 2>&1 &
# remember pid
pp=$!
# sleep for 2 seconds
sleep 2
# kill the child process if still exists.
kill -9 $pp > /dev/null 2>&1
st=$?
# kill playback process if any
test $play_pid != 0 && kill -9 $play_pid
/sbin/modprobe -C $TMP -r snd-ioctl32 >/dev/null 2>&1
/sbin/modprobe -C $TMP -r snd-$1 >/dev/null 2>&1
if [ $st = 0 ]; then
test $do_logging = 1 && echo "capture no return" >> $LOGFILE
return 2
else
test $do_logging = 1 && echo "capture OK" >> $LOGFILE
return 0
fi
}
function get_dma_pair () {
case $1 in
0)
echo 1 3 5;;
1)
echo 0 3 5;;
3)
echo 1 0 5;;
5)
echo 3 1 0;;
esac
}
#
# check playback on specified irqs
#
# ac_try_irq card opts irqs...
# return 0 - OK, 1 - NG, 2 - not working (dma problem?)
#
function ac_try_irq () {
card=$1
opts="$2 ${mpfx}irq=$3"
ac_try_load $card $opts >/dev/null 2>&1
result=$?
case $result in
0)
ac_opts="$opts"
return 0
;;
2)
for irq in ${*:4}; do
opts="$2 ${mpfx}irq=$irq"
ac_try_load $card $opts >/dev/null 2>&1
if [ $? = 0 ]; then
ac_opts="$opts"
return 0
fi
done
return 2
;;
esac
return 1
}
#
# check playback/capture on dma1 & dma2 & specified irqs
#
# ac_try_dmas card opts irqs...
# return 0 - OK, 1 - NG
#
function ac_try_dmas () {
dma_list=`check_dma_avail 1 0 3 5`
for irq in ${*:3}; do
for dma1 in $dma_list; do
for dma2 in `get_dma_pair $dma1`; do
opts="$2 ${mpfx}dma1=$dma1 ${mpfx}dma2=$dma2 ${mpfx}irq=$irq"
ac_try_load $1 $opts >/dev/null 2>&1
result=$?
if [ $result = 1 ]; then
if [ $try_all_combination = 1 ]; then
continue
else
return 1
fi
elif [ $result = 0 ]; then
test $do_logging = 1 && echo "Now checking capture..." >> $LOGFILE
ac_opts="$opts"
ac_try_capture $1 yes $opts >/dev/null 2>&1 && return 0
for d in yes no; do
for dma2 in $dma_list; do
if [ $dma1 != $dma2 ]; then
opts="$2 ${mpfx}dma1=$dma1 ${mpfx}dma2=$dma2
${mpfx}irq=$irq"
ac_opts="$opts"
ac_try_capture $1 $d $opts >/dev/null 2>&1 && return 0
fi
done
done
return 0
fi
done
done
done
return 1
}
# check if the option $2 exists in card �1: set value $3
function ac_check_option () {
if modinfo -p snd-$1 | grep $2 > /dev/null 2>&1 ; then
echo "$2=$3"
fi
}
function ac_try_card_sb8 () {
card=sb8
irq_list=`check_irq_avail 5 3 9 10 7`
for dma8 in `check_dma_avail 1 3`; do
opts="${mpfx}dma8=$dma8"
ac_try_irq $card "$opts" $irq_list && return 0
done
return 1
}
function ac_try_card_sb16 () {
card=sb16
isapnp=`ac_check_option $card ${mpfx}isapnp 0`
opts="$isapnp"
irq_list=`check_irq_avail 5 9 10 7 3`
dma_list=`check_dma_avail 0 1 3`
dma16_list=`check_dma_avail 5 6 7`
# at first try auto-probing by driver itself
ac_try_load $card $opts >/dev/null 2>&1
result=$?
case $result in
0)
ac_opts="$opts"
ac_try_capture $card yes $opts >/dev/null 2>&1 && return 0
for d in yes no; do
for dma8 in $dma_list; do
for irq in $irq_list; do
opts="${mpfx}dma8=$dma8 ${mpfx}irq=$irq $isapnp"
ac_try_capture $card $d $opts >/dev/null 2>&1 && return 0
done
done
done
return 0
;;
2)
for dma16 in $dma16_list; do
opts="${mpfx}dma16=$dma16 $isapnp"
if ac_try_irq $card "$opts" $irq_list ; then
ac_try_capture $card yes $ac_opts >/dev/null 2>&1 && return 0
ac_opts_saved="$ac_opts"
for d in yes no; do
for dma8 in $dma_list; do
ac_opts="$ac_opts_saved ${mpfx}dma8=$dma8"
ac_try_capture $card $d $ac_opts >/dev/null 2>&1 && return 0
done
done
# return anyway here..
return 0
fi
done
;;
esac
return 1
}
function ac_try_card_es1688 () {
card=es1688
opts=""
irq_list=`check_irq_avail 5 9 10 7`
for dma8 in `check_dma_avail 1 3 0`; do
opts="${mpfx}dma8=$dma8 ${mpfx}mpu_irq=-1"
ac_try_irq $card "$opts" $irq_list && return 0
done
return 1
}
function ac_try_card_es18xx () {
card=es18xx
opts=`ac_check_option $card ${mpfx}isapnp 0`
ac_try_dmas $card "$opts" `check_irq_avail 5 9 10 7` && return 0
return 1
}
function ac_try_card_cs4236 () {
card=cs4236
irq_list=`check_irq_avail 5 7 9 11 12 15`
isapnp=`ac_check_option $card ${mpfx}isapnp 0`
for port in 0x530 0x534; do
opts="${mpfx}port=$port ${mpfx}cport=0x538 $isapnp"
ac_try_dmas $card "$opts" $irq_list && return 0
done
return 1
}
function ac_try_card_cs4232 () {
card=cs4232
irq_list=`check_irq_avail 5 7 9 11 12 15`
isapnp=`ac_check_option $card ${mpfx}isapnp 0`
for port in 0x530 0x534; do
opts="${mpfx}port=$port ${mpfx}cport=0x538 $isapnp"
ac_try_dmas $card "$opts" $irq_list && return 0
done
return 1
}
function ac_try_card_cs4231 () {
card=cs4231
irq_list=`check_irq_avail 5 7 9 11 12 15`
for port in 0x530 0x534; do
opts="${mpfx}port=$port"
ac_try_dmas $card "$opts" $irq_list && return 0
done
return 1
}
function ac_try_card_opl3sa2 () {
card=opl3sa2
irq_list=`check_irq_avail 5 9 3 1 11 12 15 0`
isapnp=`ac_check_option $card ${mpfx}isapnp 0`
for port in 0x370 0x538 0xf86 0x100; do
for wss_port in 0x530 0xe80 0xf40 0x604; do
opts="${mpfx}fm_port=-1 ${mpfx}midi_port=-1 ${mpfx}port=$port
${mpfx}wss_port=$wss_port $isapnp"
ac_try_dmas $card "$opts" $irq_list && return 0
done
done
return 1
}
function ac_config_legacy () {
$DIALOG --title "WARNING" --yesno "
Probing legacy ISA cards might make
your system unstable.
Are you sure to proceed?
" 10 50 || acex 0
if [ x"$1" = x ]; then
probe_list="opl3sa2 cs4236 cs4232 cs4231 es18xx es1688 sb16 sb8"
else
probe_list=$*
fi
menu_args=()
for card in $probe_list; do
cardname=`/sbin/modinfo -d snd-$card | sed -e 's/^\"\(.*\)\"$/\1/g'`
if [ x"$cardname" != x ]; then
menu_args=("${menu_args[@]}" "$card" "$cardname" "on")
fi
done
if [ x$menu_args = x ]; then
$DIALOG --msgbox "No legacy drivers are available
for your machine" 5 50
return 1
fi
$DIALOG --title "Driver Selection" --checklist \
" Probing legacy ISA cards
Please select the drivers to probe:" \
17 64 8 "${menu_args[@]}" 2> $FOUND || acex 0
if [ $try_all_combination != 1 ]; then
if $DIALOG --yesno "
Shall I try all possible DMA and IRQ combinations?
With this option, some unconventional configuration
might be found, but it will take much longer time." 10 60
then
try_all_combination=1
fi
fi
echo "Probing legacy cards.. This may take a few minutes.."
echo -n "Probing: "
cards=`cat $FOUND | tr -d \"`
for card in $cards; do
echo -n " $card"
ac_opts=""
if eval ac_try_card_$card ; then
echo ' : FOUND!!'
ac_config_card $card $ac_opts
return 0
fi
done
echo
$DIALOG --title "Result" --msgbox "No legacy cards found" 5 50
return 1
}
#
# main part continued..
#
if [ x"$legacy_probe_card" != x ]; then
ac_opts=""
if eval ac_try_card_$legacy_probe_card >/dev/null 2>&1; then
echo "$ac_opts"
exit 0
else
echo "FAILED"
exit 1
fi
fi
intro
if [ $do_legacy_only = 1 ]; then
ac_config_legacy
exit 0
fi
probe_cards
devs_found=()
if [ -s "$FOUND" ]; then
while read dev card ; do
/sbin/modprobe -a -l | grep $card'\.o' >/dev/null 2>&1 || continue
cardname=`find_device_name $dev`
if [ -z "$cardname" ]; then
cardname="$card"
fi
card=${card##snd-}
devs_found=("${devs_found[@]}" "$card" "$cardname")
done <"$FOUND"
fi
if [ x$devs_found != x ]; then
#
# check for TP600E
#
if [ ${devs_found[0]} = cs46xx ]; then
if /sbin/lspci -nv | grep -q "Subsystem: 1014:1010"; then
if $DIALOG --yesno "
Looks like you having a Thinkpad 600E notebook.
On this notebook, CS4236 driver should be used
although CS46xx chip is detected.
Shall I try to snd-cs4236 driver and probe
the legacy ISA configuration?" 13 60
then
try_all_combination=1
ac_config_legacy cs4236
exit 0
fi
fi
fi
devs_found=("${devs_found[@]}" "legacy" "Probe legacy ISA (non-PnP) chips")
$DIALOG --title "Soundcard Selection" --menu "
Following card(s) are found on your system.
Choose a soundcard to configure:
" 17 76 8 "${devs_found[@]}" 2> $FOUND || acex 0
card=`head -1 $FOUND`
if [ "$card" = "legacy" ]; then
ac_config_legacy
else
ac_config_card "$card"
fi
exit 0
else
if $DIALOG --yesno "
No supported PnP or PCI card found.
Would you like to probe legacy ISA sound cards/chips?
" 9 60 ; then
ac_config_legacy
exit 0
fi
fi
rm -f "$FOUND" "$DUMP"
exit 0
-------------------------------------------------------
This sf.net emial is sponsored by: Influence the future of
Java(TM) technology. Join the Java Community Process(SM) (JCP(SM))
program now. http://ad.doubleclick.net/clk;4699841;7576301;v?
http://www.sun.com/javavote
_______________________________________________
Alsa-cvslog mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-cvslog
