On Fri, 18 Oct 2002, Bob Ham wrote:
> On Wed, Jul 31, 2002 at 04:52:29PM +0200, Takashi Iwai wrote:
>
> > on emu10k1, the signals from ac97 are routed to the capture fifo and
> > then you can record them. in addition, you can route other sources
> > and mix them to this capture fifo. the switch shown above does this.
> > if these switches are on, then the signals from livedrive are routed
> > and mixed with the signals from ac97 (if enabled).
> >
> > there are another switches, "Line LiveDrive Playback Volume".
> > this will route the input of livedrive to the DAC, i.e. you'll hear
> > the sounds from front speakers.
> > i guess, these switches are still turned on, in your case.
>
> Having eventually compiled alsa from cvs, I hoped maybe this problem had
> been solved. It's still there :( To recap, I'm setting the livedrive line to
> capture, putting the linedrive line capture level right up and the livedrive
> line level right down, putting the ac97 capture level right up and setting the
> "Capture" thingy (whatever that is) to capture and putting its level right up.
> It does NOT capture the livedrive line. From what was said before, it
> should be. The output of amixer is attached, so as there's no ambiguity.
>
> I sincerely hope this can be fixed.
Please, send us output from 'amixer scontents' and 'amixer contents' to
figure out the problem. Thanks.
Jaroslav
-----
Jaroslav Kysela <[EMAIL PROTECTED]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
