> > snd-card-mtpav: > > [...] > > some or all output LEDs of totally unused output ports are flashing. Seems as > > if the data got routed to a wrong port - or was even broadcasted to all ports. > > The more midi traffic, the more often this error occurs. > [..] > The problem of mtpav has been reported repeatedly by Allan, too.
Did he post these reports to this list? I think i have to search the archive again. > > And if i add some more midi traffic, the sequencer queue slows down. I > > [...] > Hmm.. it's very strange, and not intended at all.. > Do you mean that the calculated value is actually slow down or the > actually playing tempo is slow down? The played music itself slows down. > So far the maximum number of events delivered at each interrupt is > limited to 50. This might be the reason. > This restriction is not applied in the trigger by non-interrupt call. > I think RTC timer driver should work better because it uses tasklet > inside. I'll give it a try. But first i want to reproduce this slowdown with playmidi1. Unfortunateley, the -q switch does not work - events then get sent in blocks to the outputs. > Anyway, i'll test it too (after (or during) debugging of nasty lock-up > on my 2.4.10 system.. :-<) Good luck! Stef(an). _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
