> And 'aplay -D hw:0,0 <filename>'?
jack@babyjesus:/usr/share/sounds$ aplay -l
card 0: card0 [PowerMac Tumbler], device 0: PMac Tumbler [PowerMac
Tumbler]
Subdevices: 1/1
Subdevice #0: subdevice #0
jack@babyjesus:/usr/share/sounds$ aplay -D hw:0,0 generic.wav
Playing WAVE 'generic.wav' : Signed 16 bit Little Endian, Rate 44100
Hz, Mono
aplay: set_params:719: Sample format non available
> It appears like a driver problem (wrong mono sample output or incorrect
> mixer settings at the driver level).
Wouldn't be too surprising. I'm not sure how that works. Perhaps if
you point me in the right direction to where mono handling is commonly
done, I can dig into the snd-card-pmac driver some more.
jack.
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
