On Sun, Feb 10, 2002 at 08:12:20PM +0100, Ludovic Drolez wrote: > I trying to make my SB16Pro work (not pnp). I've compiled alsa with no isa > pnp support but when I insert the module I get the following messages: > > /lib/modules/2.4.17-k6/misc/snd-card-sb16.o: init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, including > invalid IO or IRQ parameters
Very clear error message: please supply proper parameters for the snd-card-sb16 module. "modinfo snd-card-sb16" will tell you what parameters the module accepts. > /lib/modules/2.4.17-k6/misc/snd-card-sb16.o: insmod > /lib/modules/2.4.17-k6/misc/snd-card-sb16.o failed > /lib/modules/2.4.17-k6/misc/snd-card-sb16.o: insmod snd-card-sb16 failed > > and dmesg says: > > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > snd: Sound Blaster 16 soundcard #1 not found at 0x220 or device busy > snd: Sound Blaster 16 soundcard #2 not found or device busy > > BUT, If I switch to k 2.2.19 and recompile alsa 0.5.12 or 0.5.11 it works > perfectly !!! So, Yet Another Kernel 2.4. bug ???? I don't think so. I think you either forgot to specify the correct module parameters, or you somehow loaded the kernel Soundblaster driver. Did you read the file Documentation/Changes in the kernel source tree? The linux-2.4 kernels need quite some new userland programs to work properly. Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED] WWW: http://www-ict.its.tudelft.nl/~erik/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
