Takashi Iwai schrieb am Dienstag, den 12. Februar 2002: > > The patch is apprently not enough. We need additional codes in > snd_ice1712_ak4524_write() to send signals to ak4524 correctly. > Most likely there are gpio bits for codec selection, data and clock > lines. Looking at the photo of the card, the DSP24 Value looks like > having fairly different usage of gpio.
Yes, i wondered about that ;-) For me it was just a way of making it work a bit more. > If we really have no info about this card, we need to guess from > other cards how the connections are.. Well, it's not a good dream.. I wrote to Hoontech and asked about more information about the card, but I don't know how good they are releasing spec. > Since your card was recognized as STDSP24, it means that both cards > have the same sub vendor/device id. Thus it's difficult to guess > which chip is. Perhaps trying to detect ak4524 at first, then one > can recognize it as DSP24 Value or not. I asked Hoontech about that too. > Do you mean whether the routing itself doesn't work, or ADC volumes > cannot be controlled? The routing is a generic function of ice1712, > so this must work regardless of the card model. Without my patch the volumes were not available and on the routing page only the routing to S/PDIF was available. With my patch the routing to H/W Out is awailable too (and works). The DAC & ADC volume don't seem to work though. christof -- Christof Damian Technical Director, guideguide ltd. _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
