Hi, At Mon, 25 Feb 2002 13:33:05 +1100, Chris Wenn wrote: > > Hey there. > > Soory about the cross-posting, but I'm hoping someone can give me a > couple of pointers. I have a Terratec SoundSystem DMX (that's a Maestro > 2E card) which I can't get fired up using either alsaconf or by hand > (I'm running the debian packages of alsa 0.9.0beta10) When I configure > the card in alsaconf, I get through the first part ok (though I'm > guessing at the values for configuration), until it's time to load up > the mixer progs, at which point it crashes out saying: > > # Loading driver: > # Starting ALSA sound driver (version 0.9.0beta10): no sound cards > # defined. > # Setting the PCM volume to 100% and the Master output volume tp 50% > # amixer: Mixer attach default error: No such file or directory > # Could not initialize the mixer, the card was probably not detected > # correctly. > > If I do the configuration by hand in /etc/modules.conf, I get an error > saying that 'parm_snd_pcm_channels_p' and 'parm_snd_pcm_channels_c' do > not exist (sorry, I don't have the exact output to hand) these module parameters are obsolete on 0.9.0 (they are for 0.5.x drivers). sorry if you referred to INSTALL in alsa-driver. the document was wrong. now it's fixed.
> If someone could mail me the correct values and a quick how-to on > getting the damn thing fired up, I'd much appreciate it. please remove all module options from snd-es1968 (except for snd_index). it should work as default. also, please make sure that the version of your alsa-utils / alsa-lib is really 0.9.0. HTH. ciao, Takashi _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
