Hi there. I have the wackiest problem with my VIA 8233.
I can record just fine, but playback does nothing.
I have a KT266 based Aopen AK77 Pro(A) 133 motherboard,
and 'Everything works great under Windows(tm)', but
under linux (ALSA 0.5 and 0.9) I can only get interrupts
to happen on record. No interrupts whatsoever on playback.
I have all the mixers unmuted, volumes set, etc. etc.
I've tried (by forcing PNP settings in the bios) the
VIA 8233 on IRQs 12 & 5, with no change.
Any ideas?
Anyone know where I can find the VIA 8233 specs so I can
figure this out?
--------- lspci -xxx -------------------------------------
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev
40)
00: 06 11 59 30 01 00 10 02 40 00 01 04 00 00 00 00
10: 01 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 d4 11 60 53
30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 03 00 00
40: 01 cc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
------- lspci -vvv ------------------------------------
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev
40)
Subsystem: Analog Devices: Unknown device 5360
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
--
Jason McMullan, Senior Linux Consultant
Linuxcare, Inc. 412.432.6457 tel, 412.656.3519 cell
[EMAIL PROTECTED], http://www.linuxcare.com/
Linuxcare. Putting open source to work.
_______________________________________________________________
Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
