>Hi, >I was very excited and pleased to see hdsp driver had reached cvs (thank you >Paul !) , so I gave it a try. Here are the results. >I manage to insmod everything needed except the snd-hdsp module. I get the >following in syslog: >May 16 12:11:18 satellite kernel: RME Hammerfall-DSP: no cards found >May 16 12:15:36 satellite kernel: ALSA >../../alsa-kernel/pci/rme9652/hdsp.c:455: Hammerfall-DSP: no Digiface or >Multiface connected! >May 16 12:15:36 satellite kernel: RME Hammerfall-DSP: no cards found > >I'm using a cardbus hdsp + multiface on a toshiba satellite notebook, with >kernel 2.4.18. The computer fails to boot with the card inserted, but accepts >the card afterwards, and the host led on the multiface switches down. > >cat /proc/pci outputs >Bus 3, device 0, function 0: > Multimedia audio controller: PCI device 10ee:3fc5 (rev 10). > IRQ 10. > Master Capable. Latency=64. > Non-prefetchable 32 bit memory at 0xd2400000 [0xd20fffff]. >but syslog shows >May 16 09:54:57 satellite kernel: cs: cb_alloc(bus 3): vendor 0x10ee, device >0x3fc5 >May 16 09:54:57 satellite kernel: PCI: Failed to allocate resource >0(d2400000-d20fffff) for 03:00.0 >May 16 09:54:57 satellite kernel: PCI: Enabling device 03:00.0 (0080 -> 0082) >May 16 09:54:57 satellite cardmgr[258]: socket 0: CardBus hotplug device > >Any idea?
send the output of lspci -vv please, with and without the PCMCIA interface plugged in. this is not an ALSA issue (yet). it appears that the cardbus/pci bridge code in the kernel may not be working correctly .. --p _______________________________________________________________ Hundreds of nodes, one monster rendering program. Now that’s a super model! Visit http://clustering.foundries.sf.net/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
