On Wed, 22 May 2002 20:35:09 +0530 "Shakul Arora, Noida" <[EMAIL PROTECTED]> wrote:
> Hi, > > Please if you can help how can I program the device the "MIX" mode > for both LINE IN and MIC capture. I accept that both the > inputs are to be capture in mono, in stero mode the quality will be > bad. Check either alsamixer or any other ALSA or OSS compatible mixer. on the same global volume send sliders you should be able to also set the record option. You should also play with the IGAIN slider to adjust the input volume rate for recording. One of the things that surprised me the most about the ensoniq 1371 cards is the amazingly clean ADC compared to my other cards. If you have your computer and whathaver you are using as input source well connected and properly grounded, you should get no noise at all while recording. So far i've been using it as cheap analog source recording, connected to a mixer, which has connected a couple of synths, and the results were extremely good. Regards Juan Linietsky _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
