> ok, now i did a very very quick hack. could you try the attached > patch? (you'll need to pass the module option snd_dual_codec=1) > it doesn't change the TCID value (it was set to 1). it might be > different value. tune as you like.
You did quite a lot of code in such a short time. Thanks a lot! Unfortunately does not work: ALSA ../alsa-kernel/pci/cs4281.c:1476: DLLRDY not seen CS4281 soundcard not found or device busy (I have done modprobe snd-cs4281 snd_dual_codec=1). Please let me know if you have any other ideas, otherwhise I will go on to debug it myself. Your patch seems to be a very good start. BTW I am using 2.4.17 kernel recompiled with HZ=1000 and low-latency patch and alsa-driver-0.9.0rc1. In fact I would prefer alsa-driver-0.5.12a to work with this dual codec (application porting!) but I am aware nobody is going to help me with ALSA5. Best regards, -- Tomasz Motylewski BFAD GmbH & Co. KG _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
