At Fri, 31 May 2002 11:38:53 +0200, I wrote: > > At Fri, 31 May 2002 18:23:31 +0900, > Patrick Shirkey wrote: > > > > Takashi Iwai wrote: > > > > > > > > just run lsusb (as root) without options. then it will list all > > > devices out. or, you can specify the vendor and device ids per -d > > > option. please send me the output. > > > > > > > > > > I enventually managed to get it. here it is again. > > > > ----- > > > > Bus 001 Device 004: ID 0763:2001 Midiman > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 0 Interface > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x0763 Midiman > > idProduct 0x2001 > > bcdDevice 1.01 > > iManufacturer 1 M Audio > > iProduct 2 USB AudioSport Quattro (tm) > > iSerial 0 > > bNumConfigurations 1 > > cannot get config descriptor 0, Connection timed out (110) > > hmm... that sounds bad... > but the module is loaded successfuly? then the descriptor itself can > be got inside the kernel. > ok, i'll put a /proc interface to dump the obtained descriptor. > a moment please...
now a new version is cvs. it dumps the descriptor at /proc/asound/cardX/descriptor. if the cvs servers is not sync'ed, please let me know. i'll send you a patch. btw, you might try another hub module. for uhci there are two modules, uhci and usb-uhci. i'm not sure which one is better, though. Takashi _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
