Takashi Iwai wrote: > At Wed, 12 Jun 2002 22:56:03 +0900, > Patrick Shirkey wrote: > >>Takashi Iwai wrote: >> >>>>---- >>>># aplay -f dat -D ttable /1REC/beastie_boys-track_8.wav >>>>Playing WAVE '/1REC/beastie_boys-track_8.wav' : Signed 16 bit Little >>>>Endian, Rate 44100 Hz, Stereo >>>>aplay: set_params:737: Broken configuration for this PCM: no >>>>configurations available >>> >>> >>>the error came from snd_pcm_hw_params_any(). >>> >>>i'm wondering why the second card has only one channel. >>>is it really correct? >>> >>> >> >>It has one pcm device yes. hw1:0 > > > but this pcm device has stereo channels, doesn't it? > > > sorry, i still have not clear idea what you are exactly trying to do. > > you have two consumer cards. assuming sblive and cmipci. > and you'd like to combine these two cards as if 4 channel captures > (and playbacks). or do you have any other wish? > > if yes, the exactly same as Joern's configuration should work... >
Sort of. The cmipci has two stereo devices and the intel8x0 has one. If I want the cards ganged then I want to be able to use all the playback channels. Unfortunately the cmipci doesn't have a corresponding capture device for pcmC0D1p which I think is what's causing the problems. I'm not sure that the .asoundrc file can deal with that or not. Is there anything I can do to fake pcmC0D1c or alsa-lib into using pcmC0D0c instead or can I just not use that device as part of a multishare dummy card? -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.boosthardware.com/LAU/guide/ ======================================== _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
