Hi, my Multiface now works. I am not quite sure exactly what I did right, but I suspect it is that I now load snd_hammerfall_mem at boot time. I suspect some kind of faulty state is introduced if snd_hammerfall_mem isn't loaded in the correct way. This is impossible to correct later by unloading all the alsa modules and start over. Maybe it can be made a little more fault tolerant.
By the way, thanks for the driver! Marcus Paul Davis wrote: > > >> i know its mundane, but are you sure you have the cables hooked up > >> correctly? > > > >I booted windows to check the setup, and it works. > > > > you can set the passthru control > >> > >> amixer cset name=Passthru 1 > >> > >> and check that passthru is working OK. > > > >This doesn't work either. > > OK, thats useful information. I wish I knew what it meant :) My best > guess right now is that its something to do with the channel mapping; > since the i/o configuration on the multiface is different, it may be > that i need to change something about how we address certain channels. > > ># alsactl store 1 > >alsactl: get_control:359: Unknown control type: 6 > > have you updated your alsa-utils and alsa-lib? there was a new control > type (64 bit integer) introduced for the H-DSP. > > >At some point the 'MIDI STATE out' is lit and stays lit. I don't use > >MIDI. (I think, if not aplay tries to play a wav as midi.) > > Do you have any idea at what point this happens? > > --p _______________________________________________________________ Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
