Hi, At Fri, 21 Jun 2002 16:10:20 +0300, P. Christeas <[EMAIL PROTECTED]> wrote: > > I am using a ESS Allegro card (maestro3 driver). I could not use the input > (mic), because its volume could not be set by the AC'97 mixer. > I just found that the hw has a 5-bit setting, while the alsa AC'97 code only > used 4 bits. It was easy enough for me to change that to 5-bits and make my > mic work. > > The questions are: does anybody else have trouble in setting the mic-in > volume? > Should we make that volume 5-bit (it will only look buggy to 4-bit hw, but > will work for both)? > If not, is there any way to have the card driver (i.e. maestro3 etc.) tell > the mixer what to use?
in 0.9.0rc2 there is already a code to change the bits of mic/phone volumes. please check whether it works for you. Takashi ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
