Sorry, I didn't mean to mislead you, I am not using the analog on the chip. I am going directly in via the coax digital in. From what I understand the board should do "sample-perfect" transfers, but similar to the es1968, half my samples seem to be garbage. Playback is perfect, it is just recording that is broke (arecord or my own code).
Your right, it may not be related, but where do I begin to figure out what is wrong? Does anyone reading this have a board like mine? h. Takashi Iwai wrote: > At Mon, 17 Jun 2002 14:00:21 -0700, > Howard Abrams wrote: > >>I am havine a similar problem on my m-audio dio 2448 (CMI8738 model 37). >>In my own code, or using arecord, some of the samsples are correct, but >>some are very wrong, and make a loud clicking noise. >> > > i believe your problem is not related with the one on es1968. > and i guess it's a hardware problem... > the analog i/o on cm8738 is very bad, although its digital i/o is > nice. > > > Takashi > > ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
