hello * ! i'm tracking down a nasty problem i have with jack. is there any way to increase the periods-per-hardware-buffer setting on an sblive for capture ? jackd refuses to do that, and i wonder whether it's a hardware limitation.
kleineronkel:~ # jackd -R -d alsa -d hw:0 -n 4 -p 2048 jackd 0.37.1 alsa PCM driver args: -d alsa-pcm-name (default: default) -r sample-rate (default: 48kHz) -p frames-per-period (default: 1024) -n periods-per-hardware-buffer (default: 2) -H (use hardware monitoring if available, default: no) -D (duplex, default: yes) -C (capture, default: duplex) -P (playback, default: duplex) -z[r|t|s|-] (dither, rect|tri|shaped|off, default: off) Copyright 2001-2002 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details creating alsa driver ... hw:0|2048|4|48000|swmon ALSA: cannot set number of periods to 4 for capture ALSA: cannot configure capture channel cannot load driver module alsa jack main caught signal 15 best, jörn ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek No, I will not fix your computer. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel