At Fri, 5 Jul 2002 19:30:42 +0200, Pedro Lopez-Cabanillas wrote: > > Another question: I have a snd-ens1371 and two snd-usb-midi: a Roland/Edirol > UM-2 and a Midiman Midisport 2x2. These are my modules.conf settings: > > alias char-major-116 snd > alias char-major-14 soundcore > options snd snd_major=116 snd_cards_limit=3 > alias snd-card-0 snd-ens1371 > alias sound-slot-0 snd-card-0 > alias sound-service-0-0 snd-mixer-oss > alias sound-service-0-1 snd-seq-oss > alias sound-service-0-3 snd-pcm-oss > alias sound-service-0-8 snd-seq-oss > alias sound-service-0-12 snd-pcm-oss > # ------------- USB MIDI ------------ > alias snd-card-1 snd-usb-midi > alias sound-slot-1 snd-card-1 > alias sound-service-1-1 snd-seq-oss > alias sound-service-1-8 snd-seq-oss > alias snd-card-2 snd-usb-midi > alias sound-slot-2 snd-card-2 > alias sound-service-2-1 snd-seq-oss > alias sound-service-2-8 snd-seq-oss > > with /dev/midi00 ouput goes to ens-1371, /dev/midi01 goes to the first usb > midi device, and /dev/midi02 goes to the second, but both usb devices have 2 > inputs ans 2 outputs. Can I get all my five midi ports work with oss midi > emulation?
do you really need to use oss midi devices? as long as you only reading/writing midi byte streams (i.e. no ioctls), you can use simply alsa rawmidi devices, /dev/snd/midiCxDx, instead of /dev/midiXX. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Oh, it's good to be a geek. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
