I've finally decided to switch from using OSS to ALSA, and everything works great, except I don't get any sound output! I'm sending this to the devel list since I'm dealing with the CVS version of the driver.
Using alsamixer I tried setting the Master channel at 100% as well as the "PC Speaker" channel at 100%. The detection of headphones seems to work, since the pc speaker channel gets auto-muted when headphones are plugged in. (but, still no sound is played out the headphone jack. Using alsaplayer works great, and the visual plugins show that sound should be playing. xmms works with the OSS compatibility driver as well. I built the drivers with --enable-debug=full, but I don't see any additional kernel messages from ALSA. I'm running Debian unstable (sid), on a Powerbook G3 Lombard, which has the AWACS sound chip. I'm using the CVS version of the drivers, and the packages for libasound (0.9.0rc3), alsa-utils (0.9.0rc3), and alsaplayer (0.99.71). Any ideas? What can I do to further debug this problem? Here's the output from amixer: Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined Playback channels: Front Left - Front Right Capture channels: Mono Limits: Playback 0 - 15 Mono: Capture [off] Front Left: Playback 15 [100%] [on] Front Right: Playback 15 [100%] [on] Simple mixer control 'Headphone Detection',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Line',0 Capabilities: cswitch cswitch-joined Capture channels: Mono Mono: Capture [off] Simple mixer control 'CD',0 Capabilities: cswitch cswitch-joined Capture channels: Mono Mono: Capture [off] Simple mixer control 'Mic',0 Capabilities: cswitch cswitch-joined Capture channels: Mono Mono: Capture [off] Simple mixer control 'Mic Boost',0 Capabilities: volume volume-joined Playback channels: Mono Limits: 0 - 2 Mono: 2 [100%] Simple mixer control 'PC Speaker',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 15 Front Left: Playback 15 [100%] [on] Front Right: Playback 15 [100%] [on] Simple mixer control 'Capture',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 15 [100%] Front Right: Capture 15 [100%] Simple mixer control 'Auto Mute',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'Beep',0 Capabilities: pvolume pvolume-joined Playback channels: Mono Limits: Playback 0 - 100 Mono: Playback 15 [15%] I've seen mention of people wondering where the PCM slider is in the mixer, does this have anything to do with my problem? (perhaps?) Am I supposed to have a PCM channel? Thanks in advance for the help, -- Josh Huber ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel