At Mon, 30 Sep 2002 17:56:17 +0200 (CEST), Wolfgang Hamann wrote: > > > >> At Sat, 28 Sep 2002 10:31:49 +0200 (CEST), > >> Wolfgang Hamann wrote: > >> > > >> > Hi, > >> > > >> > thanks for your reply - unfortunately it did not work, although the port and >irq could be > >> > configured in the main board settings. Since this is not my own computer, I >decided to put > >> > in an extra blaster to get a midi port > >> > >> did you access to the second midi device? > >> if you set up the mpu401 with snd-mpu401 driver, eventually the > >> device is assigned to hw:1 (corresponding to /dev/midi01 on OSS), not > >> to hw:0 (/dev/midi00 or /dev/midi on OSS). > >> > >> > >> Takashi > >> > > Hi, > > the mpu driver refused to accept the configured port and and irq at all.
what did the driver say? if it's "MPU401 not detected at xxx", then no chance. otherwise, it can be a configuration failure. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
