Hello!
Anyone working with SB Audigy driver to get hwac3 working?
I'm testing with mplayer (0.9pre9) and I get this:
mplayer -ao alsa9 -ac hwac3 foo.avi
Forced audio codec: hwac3
Opening audio decoder: [hwac3] AC3 pass-through SP/DIF
No accelerated IMDCT transform found
AUDIO: 48000 Hz, 2 ch, 16 bit (0x400), ratio: 56000->192000 (448.0 kbit)
Selected audio codec: [hwac3] afm:hwac3 (AC3 through SPDIF)
alsa-init: testing and bugreports are welcome.
alsa-init: requested format: 48000 Hz, 2 channels, AC3
alsa-init: soundcard set to iec958:AES0=0x2,AES1=0x82,AES2=0x0,AES3=0x2
ALSA lib pcm_hw.c:835:(snd_pcm_hw_open) open /dev/snd/pcmC0D3p failed: No
such device
alsa-init: playback open error: No such device
couldn't open/init audio device -> no sound
Audio: no sound!!!
Any ideas?
- Pasi Kärkkäinen
^
. .
Linux
/ - \
Choice.of.the
.Next.Generation.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
-------------------------------------------------------
This SF.net email is sponsored by: ApacheCon, November 18-21 in
Las Vegas (supported by COMDEX), the only Apache event to be
fully supported by the ASF. http://www.apachecon.com
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
