Olivier Ricordeau wrote:
I've booted with the "nodma" option (I guess that what you wanted me to do), and now here is the new output for "modprobe ali5451":[EMAIL PROTECTED] wrote:Try disabling "use dma by default" in the ide section. If that then
fixes the problem I have a patch that can get you dma back. I've got an
ali southbridge in my laptop as well and everything works fine. 784 - Michael C. Piantedosi - [EMAIL PROTECTED]
OK...
How can I disable dma in a shell??? Or do I need to recompile the kernel or something?
"hda: status timeout: status=0x80 { Busy }
hda: drive not ready for command
ali mixer creating error.
Ali pci audio not found or device busy.
/lib/modules/2.4.19-18mdk/kernel/sound/pci/ali5451/snd-ali5451.o.gz: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or on the output from dmesg
mosprobe: insmod /lib/modules/2.4.19-18mdk/kernel/sound/pci/ali5451/snd-ali5451.o.gz failed
modprobe: insmod snd-ali5451 failed"
After that, all my commands result in:
"hda: status timeout: status 8x80 { Busy }
hda: DMA disabled
hda: drive not ready for command"
I've also tried the same modprobe in single-user mode after a "hdparm -d0 /dev/hda", and no error message is displayed, but all my command result in the same error message as above.
--
-= *Olivier RICORDEAU* =- | ICQ: 65452304
Ing1 EPITA Millesime 2005 | Phone: 0686720852
[EMAIL PROTECTED]
_Might the source be with you_
-------------------------------------------------------
This SF.net email is sponsored by: ApacheCon, November 18-21 in
Las Vegas (supported by COMDEX), the only Apache event to be
fully supported by the ASF. http://www.apachecon.com
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
