The MIDI interface I'm using is a Midisport 2x2 (same results with a 1x1). It works fine with alsa cvs of 2002-08-20, has problems with alsa cvs of 2002-10-28.
This is a summary of what I have found so far. OSS emulation (raw midi interface): OSS programs using the raw midi interface emulation (I'm using pd) can't see both midi ports in the oss emulation world. They only see the first port. This is confirmed by this: cat /proc/asound/oss/devices 18: [1- 2]: raw midi Midi input and output works fine on the first port, byte counts can be read through cat /proc/asound/card1/midi0. On the older alsa version the two interfaces show up: cat /proc/asound/oss/devices 34: [2- 2]: raw midi 45: [2-13]: raw midi ALSA: input does not seem to work at all. I'm using the Muse MIDI sequencer, with the older alsa version it works fine (input), with the newer alsa version it does not record midi input at all. Output works fine on both alsa versions. The input byte counters in /proc/asound/card1/midi0 do not increment. cat /proc/asound/devices shows only one raw midi interface. This is on a two port device (but Muse lets me select either port). On the older alsa two devices show up on the listing. Has someone out there tested a similar configuration? -- Fernando ------------------------------------------------------- This sf.net email is sponsored by: See the NEW Palm Tungsten T handheld. Power & Color in a compact size! http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0001en _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
