At Tue, 14 Jan 2003 17:22:27 +0200, Pekka Pietikainen wrote: > > On Tue, Jan 14, 2003 at 04:03:12PM +0100, Takashi Iwai wrote: > > At Tue, 14 Jan 2003 16:55:46 +0200, > > Pekka Pietikainen wrote: > > > > > > On Tue, Jan 14, 2003 at 03:48:37PM +0100, Takashi Iwai wrote: > > > > At Tue, 14 Jan 2003 16:23:20 +0200, > > > > Pekka Pietikainen wrote: > > > > > > > > > > On Tue, Jan 14, 2003 at 03:16:47PM +0100, Takashi Iwai wrote: > > > > > > oops, sorry, use hw:0,0,3 instead. > > > > > Nothing comes out. Which might be the same problem as with ac3 output, > > > > > volume at 0 and no way to make it higher. > > > > > > > > ok, then try the attached patch and output hw:0,1. > > No luck with any of the AC97-SPSA values.
now i'm puzzled. the registeres and channels used should be identical with the old drivers... the attached is the old via82xx.c which can be compiled with the latest cvs tree. please replace alsa-kernel/pci/via82xx.c with it and rebuild the module. use your old VIA8233.conf and check whether the old one really works. if it doesn't work, this might be related with "IEC958 Output Switch", which was not set in the older driver. Takashi
via82xx.c
Description: Binary data
