Takashi Iwai <[EMAIL PROTECTED]> writes: [...]
> > thanks, nice to know that. > does it work w/o ENABLE_SB_MXIER even after rebooting (i mean, after > resetting the hardware) ? Yes, even after power down/power up (and it is not an ATX power supply, so it is really down when you switch off). [...] > > > Capture for cmi8330: no success at all, with or without > > PLAYBACK_ON_SB, and ENABLE_SB_MIXER defined. > > But I noticed that I cannot capture (mic recording) with DOS or > > Windows either on this machine. The microphone is ok, it is the same > > used for the successful SB16 test. So it is not out of possibility there is > > a hardware problem on my mainboard (the chip is on it, not on an add-on > > card). I have not currently the possibility to test the "line in" entry. > > I will perhaps test the CD one if it makes sense ? > > yes, but make sure that you connected the CD-cable :) > Good news, capture works with CD ! Only one gotcha (probably not related to the cmi8330 driver): there are "Line Capture Volume", "Mic Capture Volume" and "CD Capture Volume" controls. The first 2 appear in alsamixer, but not the CD one ? So you must raise the CD capture volume with amixer. Sincerely. -- Bernard Urban ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
