At Mon, 27 Jan 2003 20:24:44 +0200, Pekka Pietikainen wrote: > > Hi > > I just tried the latest cvs, and now ac3 output works just fine > (and plain old PCM output through SPDIF too). I needed the following patch > to VIA8233.conf, though. I did manage to get the driver in a state where > there was no output at all until a module reload once (mixer settings didn't > help), but I can't reproduce it anymore and that was while tweaking > VIA8233.conf.
could you tell me which ac97 codec chip is used? the spdif signal should be routed via slot 10/11 when the device 0,0,3 is used as originally designed. with your patch, the signal seems routed via the front slots 3/4 (or 6/9, 7/8). the slots usage is dependent on the ac97 codec, and i thought the set up of ALC650 was fixed recently. /proc/asound/card0/ac97#0 and ac97#0regs will be helpful for debugging. thanks, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
