At Sun, 02 Feb 2003 07:03:02 -0500, [EMAIL PROTECTED] wrote: > > In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED] > om writes: > > >I have produced a minimal patch based upon your work in CVS to get the SPDIF > >port going on A7V8X motherboards with 0.9.0rc6 until 0.9.0rc7 is released: > > I'm not sure what went wrong with 0.9.0rc7, but SPDIF output still doesn't > work with my chipset. The patch only had cosmetic changes in the 0.9.0rc7 > release, so something must have been broken between the CVS tree as of December > 30th and the 0.9.0rc7 release.
on rc7, you don't need a patch. try to use "spdif" pcm for the spdif output. it uses the SDX3 channel as described in the data sheet. playing through the spdif-out on the multi-channel is still posstible, too. but you need to reset "IEC958 AC97-SPSA" to 0, which corresponds to the slot 3/4, while the slot 10/11 is used as default on via823x. ciao, Takashi ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
