[Alsa-devel] VIA EPIA (VT1612A) and SPDIF

[Mathias Kretschmer]

Hi,

I'm wondering if anyone has SPDIF working on the
VIA EPIA ESP5000 under rc7?

Analog output is working fine for me using rc7 and the CVS via82xx module (1.25). But, I didn't have any luck getting SPDIF (PCM) to work using a Pioneer Digital Receiver.

Any success reports or any hints which knobs to turn to make it work ?

Cheers,

Mathias

Some info from /proc/asound:

[root@musicbox root]# cat /proc/asound/cards
0 [rev40 ]: VIA686A - VIA 82C686A/B rev40
VIA 82C686A/B rev40 at 0xdc00, irq 10

[root@musicbox root]# cat /proc/asound/card0/ac97#0
0-0/0: VIA Technologies VIA1612A

Capabilities : -headphone out-
DAC resolution : 18-bit
ADC resolution : 18-bit
3D enhancement : Reserved 27

Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0 SPDIF VRA
Extended status : SPDIF=3/4 SPDIF VRA
PCM front DAC : 44100Hz
PCM ADC : 48000Hz
SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1 Rate=48kHz



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel