At Thu, 20 Feb 2003 21:19:19 +0100 (CET), Jaroslav wrote: > > On Thu, 20 Feb 2003, Takashi Iwai wrote: > > > At Thu, 20 Feb 2003 15:14:45 +0100 (CET), > > Jaroslav wrote: > > > > > > If there is a way to determine the connection between sequencer port and > > > rawmidi device, I'm ok with any solution. Otherwise, please, solve this > > > problem. > > > > one of the advantages of the sequencer is that it hides the lowlevel > > implementations, regardless of mpu401 or wavetable. hence, there > > is no explicit link between the lowlevel device and the sequencer > > client/port, so far. there are only bit flags indicating what kind of > > functions are supported by the port. > > > > it's not bad to have such an attribute, though. but if we have that, > > it will be an addition. > > We can use different name for client like: > > RawMIDI - %s > > Where %s is whatever you want ;-)) card->shortname, card->id or anything > else. The card number can be calculated from the client address and device > / subdevice from the port address.
done. now everthing became more verbose :) Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
